Installation Sheet

1
Bathroom Mirror Installation Instructions
Drill
BATHROOM MIRROR
INSTRUCTIONS
TOOLS AND MATERIALS:
Unpack and inspect the product for any shipping
damages. If you find damages, do not install.
Contact Customer Service at 1-866-855-2284.
If you need assistance or have questions while
installing your mirror, contact Customer Service.
We recommend consulting a professional if you
are unfamiliar with installing bathroom fixtures.
Signature Hardware accepts no liability for any
damage to the floor, walls or for personal injury
during installation.
Pencil
Level
Read entire Bathroom Mirror Installation Instructions.
Observe all local building and safety codes.
BEFORE INSTALLING INSTALLATION
1. With the help of another person, center the mirror above the
sink at the appropriate height and mark a line at the top
of the mirror on the wall.
2. Locate and mark the position of the wall studs to which you
will fasten your mirror. You can find studs by listening for
a solid sound as you knock on the wall or by using a stud finder
Tip: If the studs in your bathroom do not line up to the mounting
location for your mirror, wood blocking can be installed between the
studs using standard 2 x 4’s. We recommend consulting a profes-
sional if you are unfamiliar
with this type of installation.
3. Measure the location of the mounting rail on the back of the
mirror to determine the location of your wall bracket. Use
the top of the mirror as your guideline. Use your level to verify
that the wall bracket is properly aligned.
4. Drill pilot holes and install the wall bracket. Because wall
construction and materials vary from home to home, the
appropriate mounting hardware may need to be purchased
from your local hardware store. Consult a professional if
you are unfamiliar with this type of installation.
5. With the help of another person, hang your mirror by attach-
ing the mounting rail to the wall bracket.
Tape Measure
Stud Finder