Installation Sheet

BELLEVUE BRIDGE KITCHEN FAUCET INSTALLATION
Installation
3. Slide the decorative escutcheon onto the center
post, as shown. Insert the faucet into its designated
mounting holes on the mounting surface.
4. From beneath the counter, slide the provided metal
washers onto each of the threaded shanks. The
beveled side of the washer should face up, as shown.
Secure the faucet to the counter by threading the
provided lock nuts onto each threaded shank. Hand
tighten, then finish tightening using a basin wrench.
1. Ensure that the water supply below your sink is
completely shut off by turning the shutoff valves all the
way to the right.
Tip: Place a small bucket below your workspace to
catch any water that may drip during the installation
process.
2. Attach the provided threaded shanks into each
handle base, with the tapered side of the threads
facing up. Apply thread sealant or plumber’s tape to
the threads before attaching. Tighten firmly using an
adjustable wrench.
2Bellevue Bridge Kitchen Faucet Installation Instructions
OFF