Installation Sheet

BELLEVUE BRIDGE KITCHEN FAUCET INSTALLATION
7. From beneath the counter, attach the hand sprayer
hose by threading it onto the center post. Apply a bit of
thread sealant or plumber’s tape to the threads before
tightening. Use an adjustable wrench to tighten firmly.
8. Attach the main water lines to the threaded shanks
on the faucet. Ensure that the hot and cold lines are
being connected appropriately. Apply plumber’s tape or
thread sealant to the threads before tightening. Hand
tighten the connections, then finish tightening with a ¼
turn using an adjustable wrench.
Tip: If needed, use the provided lock nuts and rubber
cone washers to make the connections.
5. Remove the plastic lock nut from the hand sprayer
cradle. Insert the cradle into its designating mounting
hole, and tighten the lock nut from underneath to
secure.
6. Insert the provided rubber O-ring into the end of
the hand sprayer hose, and attach it to the hand
sprayer assembly. Hand tighten firmly. Insert the hose
and hand sprayer into its cradle from above the
counter.
3Bellevue Bridge Kitchen Faucet Installation Instructions