Installation Sheet

BELLEVUE BRIDGE KITCHEN FAUCET INSTALLATION
10. Remove the aerator from the spout and turn the
faucet on. Ensure that both hot and cold water are
running properly, and check for any leaks. Allow the
water to flow for approximately 60 seconds to remove
any dust or sediment within the water lines. Reattach
the aerator and turn on the sprayer. Allow the sprayer to
run for another 60 seconds, and check for any leaks.
9. Once installation is complete, turn the main water
supply back on from underneath your sink. Check for
any leaks underneath.
4Bellevue Bridge Kitchen Faucet Installation Instructions
ON
60 sec