Specification Sheet

ManualsBrandsSignature Hardware ManualsPlumbingPendleton Simple Select Shower System with Rainfall Shower and Hand Shower

See Website For Warranty Information

www.signaturehardware.com/warranty

1.800.221.3379

REVISED 10/27/2020

FEATURES

Shape: Round

Handle Type: Lever

Features: Hand Shower Included,

Pressure-Balanced

Assembly Required: Yes

Design: Modern

Installation Type: Wall Mount

Mounting Hardware Included: Yes

Shower Head Installation Type: Wall

Shower Head Spray: Rainfall

Shower Arm Included: Yes

Shower Head Swivel: Yes

Water Connection Included: Yes

Diverter Included: Yes

Diverter Outlets: 2

Dual Functionality Allows for One or Both

Shower Features to Run at a Time

Single Function Shower Head (Full Spray)

Easy-clean Silicone Nozzles

5 Function Handshower (Full Spray, Massage

Spray, Aerated Spray, Full & Massage

Spray, and Full & Aerated)

Optional Rough-In Valve:

Pressure Balanced with Integral Stops

One-Piece Cartridge Design for Ease

of Maintenance

Back-to-Back Capability

Adjustable Temperature Limit Stop

Quick Remove Plaster Guard

Easy Mounting Brackets

CONTENTS

DIVERTER

VALVE

SHOWER HEAD

SHOWER ARM

HAND SHOWER

SLIDE BAR

HOSE

SUPPLY ELBOW

PAGE 2

PAGE 3

PAGE 4

PAGE 5

PAGE 6

PAGE 7

PAGE 8

PAGE 9

..................

PENDLETON

SIMPLE SELECT SHOWER SYSTEM WITH RAINFALL SHOWER AND HAND SHOWER

SKU: 949731

Summary of content (9 pages)

PAGE 1
P E N D L E TO N SIMPLE SELECT SHOWER SYSTEM WITH RAINFALL SHOWER AND HAND SHOWER SKU: 949731 CONTENTS DIVERTER VALVE SHOWER HEAD SHOWER ARM HAND SHOWER SLIDE BAR HOSE SUPPLY ELBOW .................. .................. .................. .................. .................. .................. .................. ..................
PAGE 2
P E N D L E TO N SIMPLE SELECT TRIM SKU: 949731 7/8" (22 mm) 1-3/4" (19 mm) 2-1/8" (54 mm) 3" (76 mm) FEATURES Material: Brass Diameter: 7-1/2" Depth: 3" NPT Connection: 1/2" 7-1/2" (191 mm) CODES/STANDARDS cUPC ASME A112.18.1/CSA B125.1 ICC/ANSI A117.1 (when installed according to ADA standards) Massachusetts Accepted All dimensions and specifications are nominal and may vary. Use actual products for accuracy in critical situations. See Website For Warranty Information www.signaturehardware.
PAGE 3
P E N D L E TO N OPTIONAL PRESSURE BALANCE ROUGH-IN VALVE FOR SIMPLE SELECT TRIMS SKU: 949731 5-1/2" (140 mm) 4-7/8" (124 mm) 3-1/2" (89 mm) 1/2" (14NPT) 1-7/8" (48 mm) 2-7/8" (73 mm) Water Outlet A Pressure (PSI) Simultaneous (Both Valves Open) Separate (A or B Closed) FEATURES Material: Bronze Length: 4-7/8" Width: 4-3/8" Depth: 5-1/2" NPT Connection: 1/2" 20 40 60 80 Total (GPM) 3.4 5 6.3 7.4 Outlet A (GPM) 1.2 2.2 2.9 3.5 Outlet B (GPM) 2.2 2.8 3.4 3.9 Outlet A (GPM) 2.5 3.
PAGE 4
P E N D L E TO N TRADITIONAL ROUND RAINFALL SHOWER HEAD SKU: 949731 1/2" (13 mm) 2-1/2" (64 mm) 10" (254 mm) FEATURES Material: Stainless Steel Diameter: 10" Height: 2-1/2" NPT Connection: 1/2" Shower Head Flow Rate: 1.8 gpm (6.8 l/min) @ 80 psi CODES/STANDARDS cUPC ASME A112.18.1/CSA B125.1 CEC Listed Massachusetts Accepted All dimensions and specifications are nominal and may vary. Use actual products for accuracy in critical situations. See Website For Warranty Information www.signaturehardware.
PAGE 5
P E N D L E TO N GOOSENECK RAINFALL SHOWER ARM SKU: 949731 6-1/16" (153 mm) 11-3/8" (289 mm) 9-7/8" (251 mm) 3-15/16" (99 mm) 11-3/8" (289 mm) 17" (431 mm) 2-3/16" (55 mm) 4-1/8" (105 mm) FEATURES Material: Brass Length: 17" Height: 11-3/8" Escutcheon Included CODES/STANDARDS cUPC ASME A112.18.1/CSA B125.1 Massachusetts Accepted All dimensions and specifications are nominal and may vary. Use actual products for accuracy in critical situations. See Website For Warranty Information www.
PAGE 6
P E N D L E TO N TRADITIONAL MULTIFUNCTION HAND SHOWER SKU: 949731 1/2" (13 mm) -14NPSM-2A 3-5/8" (92 mm) 9-3/4" (248 mm) 2-3/4" (70 mm) FEATURES Material: ABS Length: 3-5/8" Width: 2-3/4" Height: 9-3/4" Maximum Flow Rate: 1.8 gpm (6.8L/min) max @ 80 psi CODES/STANDARDS cUPC ASME A112.18.1/CSA B125.1 ASME A112.18.3 WaterSense Massachusetts Accepted All dimensions and specifications are nominal and may vary. Use actual products for accuracy in critical situations.
PAGE 7
P E N D L E TO N 27” TRADITIONAL SLIDE BAR FOR HAND SHOWER SKU: 949731 3" (76 mm) 4-5/8" (117 mm) 3" (76 mm) 27" (686 mm) 24-1/16" (611 mm) 4-1/8" (105 mm) FEATURES Material: Brass Length: 4-1/8" Width: 4-5/8" Height: 27" Base Plate Height: 3" Base Plate Width: 3" PRODUCT IMAGE All dimensions and specifications are nominal and may vary. Use actual products for accuracy in critical situations. See Website For Warranty Information www.signaturehardware.com/warranty PAGE 7 Code: SHSB3010 1.800.221.
PAGE 8
P E N D E LT O N METAL HOSE FOR HAND SHOWER SKU: 949731 60” (1524 mm) 1/2" (13mm) -14NPSM-2A 1/2" (13mm) -14NPSM-2A 1" (25mm) FEATURES Length: 60" NPT Connection: 1/2" Double Spiral Construction Metal Conical Nut CODES/STANDARDS cUPC ASME A112.18.1/CSA B125.1 Massachusetts Accepted All dimensions and specifications are nominal and may vary. Use actual products for accuracy in critical situations. See Website For Warranty Information www.signaturehardware.
PAGE 9
P E N D L ETO N ROUND WATER SUPPLY ELBOW FOR HAND SHOWER SKU: 949731 1-1/2" (38 mm) 2-1/4" (57 mm) 1/2"-14NPSM FEATURES Material: Brass Length: 2-1/4" Width: 1-1/2" Height: 2-1/4" NPT Connection: 1/2" Female Wall Connection: 1/2" Male Hose Connection: 1/2" CODES/STANDARDS cCSAus ASME A112.18.1/CSA B125.1 Massachusetts Accepted All dimensions and specifications are nominal and may vary. Use actual products for accuracy in critical situations. See Website For Warranty Information www.signaturehardware.