Specification Sheet

ManualsBrandsSignature Hardware ManualsPlumbingHibiscus Simple Select Shower System with Rainfall Shower and Hand Shower - Trim Only

See Website For Warranty Information

www.signaturehardware.com/warranty

1.800.221.3379

HIBISCUS

FEATURES

Shape: Square

Handle Type: Lever

Features: Hand Shower Included,

Pressure-Balanced

Assembly Required: Yes

Design: Modern

Mounting Hardware Included: Yes

Shower Head Installation Type: Ceiling

Shower Head Spray: Rainfall

Shower Arm Included: Yes

Shower Head Swivel: Yes

Water Connection Included: Yes

Diverter Included: Yes

Diverter Outlets: 2

Dual Functionality Allows for One or Both

Shower Features to Run at a Time

Single Function Shower Head (Full Spray)

Easy-Clean Silicone Nozzles

Single Function Hand Shower (Full Spray)

Optional Rough-In Valve:

Pressure Balanced with Integral Stops

One-Piece Cartridge Design for Ease of

Maintenance

Back-to-Back Capability

Adjustable Temperature Limit Stop

Cast Bronze Body

Quick Remove Plaster Guard

Easy Mounting Brackets

CONTENTS

VALVE TRIM

ROUGH-IN VALVE

SHOWER HEAD

SHOWER ARM

HAND SHOWER

SLIDE BAR

HOSE

SUPPLY ELBOW

PAGE 2

PAGE 3

PAGE 4

PAGE 5

PAGE 6

PAGE 7

PAGE 8

PAGE 9

..................

SIMPLE SELECT SHOWER SYSTEM WITH RAINFALL SHOWER AND HAND SHOWER

SKU: 949742

REVISED 12/14/2020

Summary of content (9 pages)

PAGE 1
HIBISCUS SIMPLE SELECT SHOWER SYSTEM WITH RAINFALL SHOWER AND HAND SHOWER SKU: 949742 CONTENTS VALVE TRIM ROUGH-IN VALVE SHOWER HEAD SHOWER ARM HAND SHOWER SLIDE BAR HOSE SUPPLY ELBOW .................. .................. .................. .................. .................. .................. .................. ..................
PAGE 2
HIBISCUS SIMPLE SELECT TRIM SKU: 949742 1" (25 mm) 1-3/4" (19 mm) 7-1/8" (181 mm) 2-1/4" (57 mm) 2-5/8" (67 mm) FEATURES Material: Brass Width: 7-1/8" Height: 7-1/8" Depth: 2-5/8" NPT Connection: 1/2" 7-1/8" (181 mm) CODES/STANDARDS cUPC ASME A112.18.1/CSA B125.1 Massachusetts Accepted All dimensions and specifications are nominal and may vary. Use actual products for accuracy in critical situations. See Website For Warranty Information www.signaturehardware.
PAGE 3
HIBISCUS OPTIONAL PRESSURE BALANCE ROUGH-IN VALVE FOR SIMPLE SELECT TRIMS SKU: 949742 5-1/2" (140 mm) 4-7/8" (124 mm) 3-1/2" (89 mm) 1/2" (14NPT) 1-7/8" (48 mm) 2-7/8" (73 mm) Water Outlet A Pressure (PSI) Simultaneous (Both Valves Open) Separate (A or B Closed) FEATURES Material: Bronze Length: 4-7/8" Width: 4-3/8" Depth: 5-1/2" NPT Connection: 1/2" 20 40 1.2 2.2 2.5 3.9 Total (GPM) 3.4 Outlet B (GPM) 2.2 Outlet A (GPM) Outlet A (GPM) Outlet B (GPM) 2.5 60 80 5 6.3 7.4 2.8 3.4 3.
PAGE 4
HIBISCUS MODERN SQUARE RAINFALL SHOWER HEAD WITH ROUNDED CORNERS SKU: 949742 1/2" (13 mm) FEMALE IPS Connection 2-1/2" (64 mm) 10" (254 mm) FEATURES Material: Stainless Steel Length: 10" Width: 10" Height: 2-1/2" IPS: 1/2" Shower Head Flow Rate: 2.5 gpm (9.5 l/min) @ 80 psi CODES/STANDARDS cCSAus ASME A112.18.1/CSA B125.1 All dimensions and specifications are nominal and may vary. Use actual products for accuracy in critical situations. See Website For Warranty Information www.signaturehardware.
PAGE 5
HIBISCUS CEILING-MOUNT SHOWER ARM SKU: 949742 4" (102 mm) 1/4" (6 mm) 2-3/8" (60 mm) 1/2" (13 mm) -14NPT 1/2" (13 mm) -14NPT 1" (25 mm) 9/16" (14 mm) 9/16" (14 mm) 2-3/8" (60 mm) FEATURES Material: Brass Shower Arm Extension: 4" Base Plate Length: 2-3/8" Base Plate Width: 2-3/8" Escutcheon Included IPS: 1/2" 1" (25 mm) 1/2" (13 mm) CODES/STANDARDS cUPC ASME A112.18.1/CSA B125.1 All dimensions and specifications are nominal and may vary. Use actual products for accuracy in critical situations.
PAGE 6
HIBISCUS HAND SHOWER SKU: 949742 9/16" (14mm) 1/2" (13mm) -14NPSM-2A 1-3/8" (35mm) 1/2" (13mm) -14NPSM-2A 8-7/16" (214 mm) FEATURES Material: ABS Length: 1-3/8" Width: 9/16" Height: 8-7/16" Maximum Flow Rate: 1.8 gpm (6.8L/min) max @ 80 psi CODES/STANDARDS cUPC ASME A112.18.1/CSA B125.1 ASME A112.18.3 WaterSense CEC Listed Massachusetts Accepted All dimensions and specifications are nominal and may vary. Use actual products for accuracy in critical situations.
PAGE 7
HIBISCUS 30" SLIDE BAR SKU: 949742 3" (76 mm) 30" (762 mm) 3-3/8" (86 mm) 23-1/2" (597 mm) PRODUCT IMAGE FEATURES Length: 3" Width: 3-3/8" Height: 30" Base Plate Width: 3/4" Base Plate Height: 1-1/2" Slide bar outside diameter: 7/8" Mounting Centers: 23-1/2" All dimensions and specifications are nominal and may vary. Use actual products for accuracy in critical situations. See Website For Warranty Information www.signaturehardware.com/warranty PAGE 7 CODE: SHSB3050, SHSB3060 1.800.221.
PAGE 8
HIBISCUS METAL HOSE FOR HAND SHOWER SKU: 949742 60” (1524 mm) 1/2" (13mm) -14NPSM-2A 1/2" (13mm) -14NPSM-2A 1" (25mm) FEATURES Length: 60" NPT Connection: 1/2" Double Spiral Construction Metal Conical Nut CODES/STANDARDS cUPC ASME A112.18.1/CSA B125.1 Massachusetts Accepted All dimensions and specifications are nominal and may vary. Use actual products for accuracy in critical situations. See Website For Warranty Information www.signaturehardware.
PAGE 9
HIBISCUS SQUARE WATER SUPPLY ELBOW FOR HAND SHOWER SKU: 949742 2" (51 mm) 1/2" (13mm) -14NPSM -2B 1-5/16" (33mm) 2-3/8" (60 mm) 1/2" (13mm) -14NPT FEATURES Material: Brass Length: 2" Height: 1-5/16" Assembly Required: No NPT Connection: 1/2" Male Wall Connection: 1/2" Male Hose Connection: 1/2" CODES/STANDARDS cUPC ASME A112.18.1/CSA B125.1 Massachusetts Accepted All dimensions and specifications are nominal and may vary. Use actual products for accuracy in critical situations.