Installation Sheet

11
ACRYLIC TUB WITH INTEGRAL DRAIN
INSTALLATION INSTRUCTIONS
Optional: If installing a separately purchased tail
piece and floor flange, measure and cut the 12” tail
piece to length by measuring from tub drain connec-
tion. Make sure the measurement extends 2” past
the bottom of the drop-in drain fitting.
13. Apply the provided lubricant to the entire tail piece
being used. Position the bathtub so that the tail piece
is in line with the drop-in drain.
14. With caution, slowly drop the tub into position,
inserting the tail piece into the drop-in drain.