Installation Sheet

3
ACRYLIC TUB WITH INTEGRAL DRAIN
INSTALLATION INSTRUCTIONS
6. Attach the flanged PVC hub adapter to the exposed
threads on the bottom of the tub. Use a small amount
of silicone on the threads to act as sealant. Allow the
silicone to dry fully.
8. Install the decorative cover plate for the overflow.
Set the cover plate over the opening, then tighten the
two set screws located on the bottom of the plate.
The set screws can be independently adjusted in order
to achieve the desired look.
7. Cut the appropriate amount of the 1 1/2” PVC to
ensure a proper connection into the P-trap under the
floor. Use the PVC primer and cement to secure the
installation to the P-trap.
P-trap
PVC hub
adapter fitting
5. To install the drain pop up mechanism and drain
cover, simply screw the pop up mechanism into drain
cap. Then, install the assembly into drain basket.