Installation Sheet
Wall Register Installation Instructions
WALL REGISTER INSTALLATION
INSTRUCTIONS
TOOLS AND MATERIALS:
Unpack and inspect the product for any
not install. Contact Customer Relations at
1.866.855.2284. If you need assistance or
have questions while installing your wall
We recommend consulting a professional if
you are unfamiliar with installing hardware.
Signature Hardware accepts no liability for
injury during installation.
BEFORE INSTALLING
INSTALLATION
1. Remove the old wall register. If the existing register is
that hold the register in place.
attach them to the register before inserting (see below). The
clips will snap into place once the register is pressed into the
secure the register to the wall.
instructions below. Observe all local building
and safety codes.
Screwdriver
register as shown.
Note: The mounting points for spring clips may be on the
long or short side of your register depending on the style
of register.
Do not discard the screws.
SPRING CLIP INSTALLATION