Installation Sheet

GETTING STARTED

BEFORE YOU BEGIN

We recommend consulting a professional if you are

unfamiliar with installing bathroom hardware. Signature

Hardware accepts no liability for any damage to the

vanity, plumbing, countertop, sink, wall, or for personal

injury during installation.

Observe all local plumbing and building codes.

Unpack and inspect the product for shipping damage. If

any damage is found, contact our Customer Relations

team at 1-866-855-2284.

NADIYA

WALL-MOUNT VANITY

SKU: 950070, 950071, 950072, 950073, 950074, 950075, 950076, 950077, 950078

REVISED 04/06/2020

CODES: 531666, 531667, 531668, 531669

531670, 531671, 531672, 531673, 531674

TOOLS AND MATERIALS:

Pencil

Level

Drill

Tape Measure

Phillips

Screwdriver

Ensure that you have gathered all of the required

materials that are needed for the installation.

Because wall construction and materials vary from

home to home, Signature Hardware does not always

provide mounting hardware. The appropriate

mounting hardware can be purchased from your local

hardware store.

The vanity must be fastened to studs behind the

�nished wall. If the studs do not align with the vanity,

proper wood blocking must be installed between the

studs where the vanity will mount.

For Warranty information, please visit: signaturehardware.com/services/warranty

Lag Bolts

PAGE 1
N A D I YA WALL-MOUNT VANITY SKU: 950070, 950071, 950072, 950073, 950074, 950075, 950076, 950077, 950078 TOOLS AND MATERIALS: BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing bathroom hardware. Signature Hardware accepts no liability for any damage to the vanity, plumbing, countertop, sink, wall, or for personal injury during installation. Pencil Drill Level Observe all local plumbing and building codes.
PAGE 2
N A D I YA WALL-MOUNT VANITY SKU: 950070, 950071, 950072, 950073, 950074, 950075, 950076, 950077, 950078 INSTALLATION 1. To determine height of included mounting bracket. Measure to desired height of vanity top, measure 5” below desired location of vanity and mark measurement. y Vanit n of io Posit e n top li m ing ount 3. Drill pilot holes at marked mounting points. Insert wall anchors into the mounting holes for reinforcement.
PAGE 3
N A D I YA WALL-MOUNT VANITY SKU: 950070, 950071, 950072, 950073, 950074, 950075, 950076, 950077, 950078 4. Rest vanity on mounting bracket. From the underside of the vanity mark through the 3 mounting holes on the back of the vanity. 5. Drill pilot holes at marked location. Once pilot holes are drilled, install vanity using lag bolts and washers. Note: A skinny pointed tool, such as a screw or screwdriver can be used to mark mounting points through the vanity.