Installation Sheet

GETTING STARTED

BEFORE YOU BEGIN

We recommend consulting a professional if you are

unfamiliar with installing this type of product. Signature

Hardware accepts no liability for any damage to the ﬂoor,

walls, plumbing, or personal injury during installation.

Observe all local plumbing and building codes.

Unpack and inspect the mirror for damage. If any

damage is found, contact our Customer Relations team

at 1-866-855-2284.

Ensure that you have gathered all of the required

materials that are needed for the installation.

Use the mirror’s PDF speciﬁcation sheet as a refer-

ence when hanging your mirror. The speciﬁcation

sheet can be found and downloaded from the product

page on our website.

Because the speciﬁcation measurements are

approximate and slight variations may occur, we highly

recommend waiting until the mirror is on-site before

drilling.

MIRROR INSTALLATION INSTRUCTIONS

FRENCH CLEAT

REVISED 02/26/2019

Pencil

Tape Measure

Level

Drill

Stud Finder

TOOLS AND MATERIALS:

PAGE 1
M I R R O R I N S TA L L AT I O N I N S T R U C T I O N S FRENCH CLEAT TOOLS AND MATERIALS: BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing this type of product. Signature Hardware accepts no liability for any damage to the ﬂoor, walls, plumbing, or personal injury during installation. Stud Finder Observe all local plumbing and building codes. Unpack and inspect the mirror for damage.
PAGE 2
M I R R O R I N S TA L L AT I O N I N S T R U C T I O N S FRENCH CLEAT INSTALLATION 1. Center the mirror using a tape measure in the desired location on your wall. Use a pencil to mark a short line on the wall along the top of the mirror. 3. Determine the location for your mounting bracket, using the marked line for the top edge of the mirror and the marked stud locations as guidelines. Use a pencil to mark the location of the mounting holes. Ensure that the bracket is perfectly level before marking.
PAGE 3
M I R R O R I N S TA L L AT I O N I N S T R U C T I O N S FRENCH CLEAT 5. Hang your mirror by lifting it onto the mounting bracket. Once hung, the mirror can be slid slightly to the left or to the right for perfect positioning.