Installation Sheet

ManualsBrandsSignature Hardware ManualsPlumbingElmdale 72" Double Vanity Cabinet Set with Mahogany Cabinet, Vanity Top and Rectangular Undermount Sinks - Single Faucet Hole

ELMDALE

DOUBLE BOWL UNDERMOUNT SINK VANITY

SKU: 951635, 951640, 951645, 951650, 951655

REVISED 01/21/2021

CODES: 532229, 532230

532251, 532253, 532254

GETTING STARTED

TOOLS AND MATERIALS:

BEFORE YOU BEGIN

We recommend consulting a professional if you are



plumbing. Signature Hardware accepts no liability for any



counter top, or personal injury during installation.





damage is found, contact our Customer Relations team

at 1-866-855-2284.

*not included



materials that are needed for the installation.







bathroom wall before installation.

PLANNING





be found and downloaded from the product page on

our website.





recommend performing any rough-in procedures with



Tape Measure*

Drill*







Neutral Cure

Silicone Sealant

Damp Cloth

Wood Shims

NEVER LIFT THE VANITY TOP FLAT NEVER CARRY THE VANITY TOP FLAT



Summary of content (9 pages)

PAGE 1
ELMDALE DOUBLE BOWL UNDERMOUNT SINK VANITY SKU: 951635, 951640, 951645, 951650, 951655 BEFORE YOU BEGIN PLANNING We recommend consulting a professional if you are unfamiliar with installing bathroom �xtures and plumbing. Signature Hardware accepts no liability for any damage to the �oor, walls, plumbing, vanity cabinet, sink, counter top, or personal injury during installation. Use the vanity’s PDF speci�cation sheet as a reference when planning your layout.
PAGE 2
ELMDALE DOUBLE BOWL UNDERMOUNT SINK VANITY SKU: 951635, 951640, 951645, 951650, 951655 CABINET INSTALLATION 1. Determine the location where you would like to install your vanity. 3. Place the vanity in the installation location. Verify that the vanity cabinet is level. If the vanity is not level, adjust the feet (if applicable) or use wooden shims to adjust as necessary. 2. Locate and mark the location of the studs to which you will fasten your vanity. You can locate studs by using a stud �nder. 4.
PAGE 3
ELMDALE DOUBLE BOWL UNDERMOUNT SINK VANITY SKU: 951635, 951640, 951645, 951650, 951655 SINK INSTALLATION 1. Carefully turn the counter top over, resting it on a soft, stable surface to prevent damage. 3. Use a pencil or marker to draw an outline around the sink perimeter. Important: The counter top is very fragile. Take caution when handling, and have someone assist you. 4. Remove the sink from the counter top. Apply a bead of silicone sealant around the top edge of the sink rim. 2.
PAGE 4
ELMDALE DOUBLE BOWL UNDERMOUNT SINK VANITY SKU: 951635, 951640, 951645, 951650, 951655 5. Carefully place the sink upside down on the counter top, positioning it within your marked outline. Once positioned, press �rmly into place. 7. Repeat steps 1-6 to attach the second sink to your top. 6. At each of the bolt holes in the counter top, attach sink clips by placing the long end of the bracket �at against the sink lip. Screw the wing bolts through the brackets and bolt holes and tighten. 8.
PAGE 5
ELMDALE DOUBLE BOWL UNDERMOUNT SINK VANITY SKU: 951635, 951640, 951645, 951650, 951655 COUNTER TOP INSTALLATION 1. Apply a bead of silicone sealant around the top edge of the vanity cabinet. 9. Wipe away any excess sealant with a damp cloth, and allow the sealant to dry. Once the sealant is dry, proceed to Step 3. 24 hr 2. With assistance from another person, slowly and carefully set the counter top onto the vanity cabinet. Once positioned, press �rmly into place.
PAGE 6
ELMDALE DOUBLE BOWL UNDERMOUNT SINK VANITY SKU: 951635, 951640, 951645, 951650, 951655 5. For stone tops, such as marble and granite, it is recommended that you apply a high-quality sealer to protect from staining and discoloration. Stone sealer should be reapplied once or twice per year, depending upon usage. 3. If you are installing a side-splash and/or back-splash, place a generous amount of silicone sealant on the back of it and press it into place against your bathroom wall.
PAGE 7
ELMDALE DOUBLE BOWL UNDERMOUNT SINK VANITY SKU: 951635, 951640, 951645, 951650, 951655 INSTALLING SHELF 2. For added stability the shelf can be attached to the shelf supports using the provided screws. The bottom drawer will need to be removed to insert screws into shelf supports. The drawer can be removed by squeezing release clips on underside of the drawer. (If shelf is already installed move to next section) 1. Remove shelf, shelf supports and screws from packaging.
PAGE 8
ELMDALE DOUBLE BOWL UNDERMOUNT SINK VANITY SKU: 951635, 951640, 951645, 951650, 951655 ADJUSTING SHELF HEIGHT 2. Remove the screw from the shelve supports if needed. Lift up the shelve and reposition the shelf supports to the desired height. Rest the shelve on the shelve supports and reinstall screws (if desired). 1. Remove drawer by pulling out fully then press the quick release trigger of the slides from the bottom of the drawer.
PAGE 9
ELMDALE DOUBLE BOWL UNDERMOUNT SINK VANITY SKU: 951635, 951640, 951645, 951650, 951655 3. Re-install the drawers by pulling the inner slides fully to the front. Sit the drawer on top of the inner slides while inserting the hooks at the back of drawer. Push drawer so that the glides and trigger will engage.