Installation Sheet
4
1.855.715.1800
NEO-ANGLE SHOWER CURTAIN ROD
SKU: 901083
Mark ceiling
support location.
7. Slide the 1" loop onto the curved section of the rod.
8. Insert the ends of the rod into the wall brackets.
Tighten the set screws with a Philips head screwdriver
to secure.
9. Mark the location of the support and measure the
distance between it and the rod. If necessary, trim the
support to the proper length with your hacksaw.
10. Once the support is ready, insert it into the 1" loop.
Attach the ceiling bracket to the other end and tighten
the set screws.