Installation Sheet

ManualsBrandsSignature Hardware ManualsPlumbingHibiscus Pressure Balanced Shower System with 10" Shower Head - Rough In Included

1.800.221.3379

HIBISCUS

SIMPLE SELECT DUAL SHOWER HEAD SHOWER SYSTEM

SISTEMA DE DUCHA CLÁSICA DOBLE SIMPLE SELECT

SKU: 949741

REVISED 04/07/2020

CODES: SHHB8040, SHRSC40S

SHRS1025S, SH5001SS

GETTING STARTED

BEFORE YOU BEGIN

We recommend consulting a professional if you are



Hardware accepts no liability for any damage to the

plumbing, or for personal injury during installation.

Observe all local plumbing and building codes.

Unpack and inspect the product before shipping

damaged product. If any damage is found, contact

our Customer Relations team at 1-800-221-3379.

Ensure that you have gathered all the required

materials that are needed for the installation.

TOOLS AND MATERIALS:

HERRAMIENTAS Y MATERIALES:

Adjustable

Wrench

Llave

ajustable

Plumbers

Tape

Cinta de

fontanería

Phillips

Screwdriver

Destornillador

Phillips

ANTES DE COMENZAR

Le recomendamos que consulte a un profesional si no

sabe cómo instalar accesorios de plomería. Signature

Hardware no asume ninguna responsabilidad con

respecto a los daños causados al inodoro, sistema de

plomería, suelo o daños personales durante

la instalación.

Cumpla con todas las normas locales de plomería y

construcción.

Retire el inodoro del empaque y veriﬁque si se

produjeron daños durante el envío. Si encuentra algún

daño, comuníquese con nuestro equipo de Servicio al

cliente al 1-800-221-3379.

CÓMO COMENZAR

Asegúrese de haber reunido todos los materiales

necesarios para la instalación.

For Warranty information, please visit: signaturehardware.com/services/warranty

Para obtener información sobre la garantía, visite: signaturehardware.com/services/warranty

Thermometer

Termómetro

Safety Glasses

Gafas de seguridad

Tape Measure

Cinta métrica

Keyhole Saw

Sierra de punta

Flathead

Screwdriver

Destornillador de

cabeza plana

Silicone Sealant

(100% Neutral Cure)

Sellador de silicona

(100% curado neutro)

Strap

Wrench

Llave de

cincha

NOTE:



install this valve and the plumbing.

NOTA:

Usted puede necesitar herramientas diferentes y más

especializadas para instalar esta válvula y el sistema

de plomería.

Summary of content (11 pages)

PAGE 1
HIBISCUS SIMPLE SELECT DUAL SHOWER HEAD SHOWER SYSTEM SISTEMA DE DUCHA CLÁSICA DOBLE SIMPLE SELECT SKU: 949741 TOOLS AND MATERIALS: HERRAMIENTAS Y MATERIALES: BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing �xtures. Signature Hardware accepts no liability for any damage to the plumbing, or for personal injury during installation. Plumbers Tape Cinta de fontanería Observe all local plumbing and building codes.
PAGE 2
HIBISCUS SIMPLE SELECT DUAL SHOWER HEAD SHOWER SYSTEM SISTEMA DE DUCHA CLÁSICA DOBLE SIMPLE SELECT SKU: 949741 VALVE INSTALLATION INSTALACIÓN DE VÁLVULA 2. Unscrew the screws, and remove the plaster guard. Then remove the diverter bonnet nuts and diverter cartridges, valve bonnet nut, cartridge and stop valves from valve body before soldering. Connect the hot and cold water supply lines into the valve body. Solder tubes into the valve body to the desired height.
PAGE 3
HIBISCUS SIMPLE SELECT DUAL SHOWER HEAD SHOWER SYSTEM SISTEMA DE DUCHA CLÁSICA DOBLE SIMPLE SELECT SKU: 949741 3. If the hot and cold inlets are reversed (hot on right and cold on left), remove bonnet nut from the valve body with reversed supply connections. Rotate the cartridge 180°, so hot appears on the right. Install the cartridge making sure that the key is fully engaged with the slot in the valve body. Slide the bonnet nut over the cartridge and thread them onto the valve body.
PAGE 4
HIBISCUS SIMPLE SELECT DUAL SHOWER HEAD SHOWER SYSTEM SISTEMA DE DUCHA CLÁSICA DOBLE SIMPLE SELECT SKU: 949741 6. To adjust the desired maximum water temperature, remove the limit stop ring from the cartridge assembly. Take note of the position of the limit stop ring on the cartridge assembly. For colder water, adjust the limit stop ring in a clockwise direction and reinstall the limit stop ring onto the cartridge assembly.
PAGE 5
HIBISCUS SIMPLE SELECT DUAL SHOWER HEAD SHOWER SYSTEM SISTEMA DE DUCHA CLÁSICA DOBLE SIMPLE SELECT SKU: 949741 7. To install the plaster guard, place the guard onto the valve body and secure with the screws. For colder water Para agua más fría 7. Para instalar la protección de yeso. Coloque la protección de yeso sobre el cuerpo de la válvula y fíjela con tornillos. 1 2 For hotter water Para agua más caliente 1 2 5 1.800.221.
PAGE 6
HIBISCUS SIMPLE SELECT DUAL SHOWER HEAD SHOWER SYSTEM SISTEMA DE DUCHA CLÁSICA DOBLE SIMPLE SELECT SKU: 949741 Copper (Soldering)/ Cobre (Soldar) If you are replacing your plumbing valve, please review the common plumbing methods illustrated below (Copper, IPS, and PEX). Remove the existing handle and valve trim before replacing your valve. Please follow all local building and plumbing codes.
PAGE 7
HIBISCUS SIMPLE SELECT DUAL SHOWER HEAD SHOWER SYSTEM SISTEMA DE DUCHA CLÁSICA DOBLE SIMPLE SELECT SKU: 949741 TRIM INSTALLATION INSTALACIÓN DE RECORTE 2. Secure backplate (2) to the valve body (3) with the screws (1) using Allen wrench provided. 2. Asegure la placa de montaje (2) al cuerpo de la válvula (3) con los tornillos (1) usando la llave allen que viene con los materiales 1. Unscrew the screws and remove the plaster guard. 1. Desatornille los tornillos y saque la protección de yeso.
PAGE 8
HIBISCUS SIMPLE SELECT DUAL SHOWER HEAD SHOWER SYSTEM SISTEMA DE DUCHA CLÁSICA DOBLE SIMPLE SELECT SKU: 949741 3. With the Allen wrench (1) provided, turn the adjusting bolts (2) clockwise until it connects to the diverter cartridges (3) and compresses to the limit position. Do not torque too much to prevent any damage. 4. Loosen the stop plugs (1) with wrench and place the stop valves (1) onto the holes in the bottom of the backplate. 4.
PAGE 9
HIBISCUS SIMPLE SELECT DUAL SHOWER HEAD SHOWER SYSTEM SISTEMA DE DUCHA CLÁSICA DOBLE SIMPLE SELECT SKU: 949741 6. Water test: Turn on water lines. Press button 1 and 2 allowing water to �ow from outlets. If the issues occur, go back to step 3 and re-install. (Before reinstalling, be sure to turn the adjusting bolts counterclockwise to the minimum position and put the stop plugs in original position.) Issue a: Button cannot bounce smoothly.
PAGE 10
HIBISCUS SIMPLE SELECT DUAL SHOWER HEAD SHOWER SYSTEM SISTEMA DE DUCHA CLÁSICA DOBLE SIMPLE SELECT SKU: 949741 7. Install the handle (1) into backplate and secure with set screw (2). Cover with index (3). COMPONENT INSTALLATION COMPONENTE INSTALACIÓN 7. Instale la manija (1) en la placa y asegúrela con el tornillo de sujeción (2). Cubra con el índice (3). 1. Apply plumbers tape to the threads of the shower arm. 1. Aplique cinta para plomero en las roscas del brazo para ducha. 2.
PAGE 11
HIBISCUS SIMPLE SELECT DUAL SHOWER HEAD SHOWER SYSTEM SISTEMA DE DUCHA CLÁSICA DOBLE SIMPLE SELECT SKU: 949741 3. Install the escutcheon. 5. Apply plumber's tape to the threads and then install the new shower head onto the shower arm clockwise. 3. Instale el chapetón. 5. Aplique cinta de plomería a las roscas y después instale el nuevo cabezal de ducha en el brazo para ducha ajustando hacia la derecha. 4. Run water to �ush out any debris. 4. Haga correr agua para eliminar los residuos.