Installation Sheet

10
ACRYLIC TUB WITH INTEGRAL DRAIN
INSTALLATION INSTRUCTIONS
9. Install the flooring surface, such as tile, leaving an
opening around the drain as shown.
Note: If you are installing a decorative tail piece and
floor flange, install the tile and leave an opening that is
2 1/4” diameter wide directly above the drain plug to
ensure the floor flange covers the hole.
10. Remove the drain plug with a pair of long nose
pliers.
11. Once ready for tub installation, apply the provided
lubricant to the rubber portion of the inside of the
drain.
12. Affix the appropriate tail piece to the waste and
overflow. Ensure the measurement between the
base of the drain and the p-trap will accommodate
the tail piece. Do not cut the brass tail piece that is
included with the drop-in drain kit.
Note: If installing a freestanding tub with an exposed
drain and overflow, use the tail piece provided with
the tub’s drain rather than those provided with the
drop-in drain.
Floor flange