Installation Sheet

4
ACRYLIC TUB WITH INTEGRAL DRAIN
INSTALLATION INSTRUCTIONS
9. Fill the tub with water to check for any leaks from the
connections. Verify that the drain is working properly.
10. Finish your installation by running a bead of neutral
cure silicone sealant around the base of the tub where
it meets the floor. Wipe away any excess sealant with a
damp cloth.
1. Set the tub in the desired location and mark the
drain hole location on the floor. Then, move the tub
away from the desired installation location so that the
plumbing can be installed.
2. Turn bathtub upside down and rest it on a moving
blanket, cardboard, or other soft surface to prevent
scratching the rim. Use caution when turning the
bathtub upside down, as the product may be heavy
and may require assistance to rotate.
INSTALLATION:
WITHOUT UNDERFLOOR ACCESS /
SLAB FLOOR INSTALLATION
Moving blanket
TOP
BOTTOM