Installation Sheet

5
ACRYLIC TUB WITH INTEGRAL DRAIN
INSTALLATION INSTRUCTIONS
3. Place a level across the bottom of the tub to
represent floor level. Raise adjustable leveling
supports to touch level. Then, raise the support an
additional 1/8" to ensure the bathtub is supported by
the support feet and not by the tub walls.
1/8”
Support feet
Tub wall
6. Once support feet are adjusted, dry fit the PVC
hub adapter onto the drain threads. Use a tape
measure to determine the gap between the bottom
of the tub, starting at the drain inside flange of the
hub adapter, and the floor. Use the level to simulate
the floor. The drain pipe should extend approximate-
ly 1” above the finished floor; however, this will vary
depending on the height of the tub.
Tape measure
PVC hub adapter
5. To install the drain pop up mechanism and drain
cover, simply screw the pop up mechanism into drain
cap. Then, install the assembly into drain basket.
4. Your tub will come with a drain and threaded tail
piece installed.
Rubber gasket