Installation Sheet

7
ACRYLIC TUB WITH INTEGRAL DRAIN
INSTALLATION INSTRUCTIONS
13. Finish your installation by running a bead of neutral
cure silicone sealant around the base of the tub where
it meets the floor. Wipe away any excess sealant with a
damp cloth.
12. Fill the tub with water to check for any leaks from
the connections. Verify that the drain is working
properly.
11. Install the decorative cover plate for the overflow.
Set the cover plate over the opening, then tighten the
two set screws located on the bottom of the plate.
The set screws can be independently adjusted in order
to achieve the desired look.