Installation Sheet

8
INSTALLATION
WITH QUICK CONNECT DRAIN
ACRYLIC TUB WITH INTEGRAL DRAIN
INSTALLATION INSTRUCTIONS
1. Drill a 4” diameter hole in the sub floor where the
drain will be installed.
2. Measure the distance from the inside of the p-trap
to the top of the sub floor (p-trap not included).
3. Cut the provided 1 ½” PVC pipe 3” shorter than the
distance between the floor and the p-trap (measure-
ment taken in step two).
4. Apply PVC primer and cement to the outside of the
PVC pipe and to the inside of the p-trap, per manufac-
turer instructions. Insert the pipe firmly into the p-trap
until cement is bonded.
2 3 4 5 6 7 8 9
2 3 4 5 6 7