Installation Sheet

4
sealing washer
nut
sealing washer
nut
11. Install the overflow assembly with the beveled
washer, overflow plate, mounting screw (provided)
and any other washers or rubber sealing gaskets
included. Apply a bead of silicone sealant to the
underside of the flange.
12. Attach the waste and overflow tee to the overflow
assembly and shoe assembly with sealing washers
and slip nuts. The beveled end of the sealing washer
should face the tee.
13. Attach the drain tube and flange to the waste and
overflow tee with the sealing washer and slip nut. The
beveled end of the sealing washer should face the tee.
14. When your tub is in place and all connections have
been made, fill the tub with water to check for any leaks
from the connections. Verify that the drain and overflow
is working properly.
CAST IRON PEDESTAL TUB
WITH OPTIONAL QUICK CONNECT DRAIN
15. Finish your installation by applying a bead of silicone
sealant around the base of the plinth where it meets the
floor. Wipe away any excess sealant with a damp cloth.