Installation Sheet

3
ACRYLIC TUB WITH INTEGRAL DRAIN
INSTALLATION INSTRUCTIONS

threads on the bottom of the tub. Use a small amount
of silicone on the threads to act as sealant. Allow the
silicone to dry fully.
8. I

two set screws located on the bottom of the plate.
The set screws can be independently adjusted in order
to achieve the desired look.
7. Cut the appropriate amount of the 1 1/2” PVC to
ensure a proper connection into the P-trap under the

installation to the P-trap.
P-trap
PVC hub
tting
5. To install the drain pop up mechanism and drain

