Installation & Assembly

1. Apply a bead of silicone sealant around the top edge

of the vanity cabinet.

2. With assistance from another person, slowly and

carefully set the counter top onto the vanity cabinet.

Once positioned, press ﬁrmly into place. Wipe away any

excess sealant using a damp cloth.

Important: The counter top is very fragile. Take

caution when handling, and have someone assist you.

3. If you are installing a side-splash and/or back-splash,

place a generous amount of silicone sealant on the

back of it and press it into place against your bathroom

wall. Fill any gaps that are left with silicone sealant. Wipe

away any excess sealant with a damp cloth.

4. Let the assembled vanity sit for 24 hours to allow all

the silicone sealant to fully dry. Once dry, proceed to

the installation of your faucet and drain.

Note: In some situations, it may be necessary to cut

the inner cabinet shelves to allow space for your

drain’s P-traps.

Step 3: Counter Top Installation

SINGLE BOWL UNDERMOUNT VANITY

Single Bowl Undermount Vantiy Installation Instructions

24 hr