Installation guide

17Island Mount Range Hood Installation Instructions
Adjusting the timer function:
While the blower (motor) is not running, press and hold Decrease Value button over 3 seconds to enter
timer mode. Adjust to desired period of delay off timer by pressing Increase Value or Decrease
Value button (minimum 1 minute to maximum 9 minutes). This setting will be saved immediately.
Activating the timer function:
While the blower (motor) is running, press and hold Power button for over 3 seconds to activate delay off
timer. Power-Off Delay Digital Timer begin to countdown, when it reaches zero, the blower (motor) will
shut down.
Adjusting the light:
Press Light button once to turn on the lights, and once again to turn off the lights.
While the lights are off, press and hold Light button for over 3 seconds to dim the lights from high to low.
Level of brightness will be stored in system’s memory.
RANGE HOOD OPERATIONS AND WIRING DIAGRAM (CONTINUED)