Part List 1PC 1 4 7 10 13 1PC 1PC 1PC 2 1PC 3 1PC 1PC 5 1PC 6 8 1PC 9 1PC 11 1PC 12 1PC 3PCS 15 2PCS 1PC 14
Part List 16 1PC 17 19 1PC 20 22 1PC 23 1PC 18 1PC 1PC 25 1PC 26 1PC 28 1PC 29 2PCS 21 24 27 30 1PC 1PC 1PC 1PC 1PC
B C D E F G H I A J K L
Part List 13 10 8 12 9 29 14 14 29 17 15 26 19 18 6 15 25 24 11 21 20 16 7 28 30 23 22 27 14 4 3 5 2 1 A A A 27 A B: 4PCS 2 2 1 B A B 1 6SETS 27 B B A: A A Assemble Lower Legs (1 & 2) to Lower Side Panel (27) using Cam-Locks (A) and Wood Dowels (B) as shown above.
A: 6SETS B: 4PCS A B A A B 3 28 A 28 B A 4 B A A 4 3 Assemble Lower Legs (3 & 4) to Lower Side Panel (28) using Cam-Locks (A) and Wood Dowels (B) as shown above. B B 28 E A: 8SETS B: 8PCS E: 1SET A 4 A 7 B B B 3 A A 30 5 A A B 2 B 27 1 A FRONT Attach Magnet (E) to Front Connect Bars (30) using included Screws, holes are pre-drilled .
B 6SETS B: 4PCS 10 B 29 B A: 29 B 10 9 9 Assemble Upper Legs (9 & 10) to Upper Side Panel (29) using Cam-Locks (A) and Wood Dowels (B) as shown above. B 29 B B 12 A: 6SETS B: 4PCS 11 B 29 11 12 Assemble Upper Legs (11 & 12) to Upper Side Panel (29) using Cam-Locks (A) and Wood Dowels (B) as shown above.
A: 4SETS B: 12PCS E: 1SET F: 4PCS E A 13 12 29 F 11 6 10 29 B 9 FRONT F Attach Magnet (E) to the Top Panel (13) using included Screws, holes are pre-drilled . Then attach Top Panel (13) and Upper Bottom Panel (6) to Upper Legs (9 & 10 & 11 & 12) and Upper Side Panels (29) using Bolts (F), Cam-Locks (A) and Wood Dowels (B) as shown above.
A: 4SETS B: 8PCS 6 28 B 7 A B 30 27 6 29 B A B 29 FRONT Attach Upper Bottom Panel (6) to Lower Legs (1 & 2 & 3 & 4) and Lower Side Panels (27 & 28) using Cam-Locks (A) and Wood Dowels (B) as shown above.
C: C 28PCS 26 8 26 8 FRONT Assemble Back Panels (8 & 26) to the back of this unit using Screws (C) as shown above. H 17 21 L: 5SETS B: 2PCS H: 5PCS G: 1SET 19 B H 17 21 18 H L 20 G B 16 L 16 L Assemble Supporter Bar (21) to Drawer Back Panel (17) using Screws (H) and Wood Dowels (B). Assemble Drawer Side Panels (18 & 19) to Drawer Back Panel (17) using Screws (H). Insert Drawer Bottom Panel (20) into the grooves on Drawer Side Panels (18 & 19) and Drawer Back Panel (17).
H: 4PCS D: 12PCS 15 6 15 H Assemble Small Connect Bars (15) to Upper Bottom Panel (6) using Screws(H). Insert Drawer into the side table as shown above. 14 14 14 Insert the Shelf Supporters (D) into the holes of the Side Panels (27 & 28 & 29) , then put the Shelf Panels (14) onto the Shelf Supporters (D).
G: 4SETS I: 8PCS 25 24 G I 23 22 23 5 Insert Door Pins (I) into the hole on the two ends of Door Panel (23). Then attach Door Handle (G) to Door Panel (23) using included bolts. Connect Door Panel (23) to Bottom Panel (5), refer to Fig.1. Then press down Door Pin (I) ( see Fig.2.) and hold the Door Panel carefully into the cabinet with the upper pin popping up into the hole of Upper Bottom Panel (6). Repeat above steps to assemble Door Panels (22 & 24 & 25).
