DINING TABLE PAGE 1 of 4
DINING TABLE PARTS IDENTIFICATION B A Table Legs Table Top F C 4 D 2 Base Panel (Small) 2 E 1 Base Panel (Large) Shelve Panel 3 4 HARDWARE LIST 2 1 2 Quantity: 30 Quantity: 30 Quantity: 4 Ø6mm Quantity: 4 Ø 1/4” 1 3/8 ” Mounting Bar Camlock 5 6 Quantity: 1 Quantity: 6 1 17/64” Allen Key STEP 1 JCBC Bolt m6 x 35mm Connecting Bolts Spring Washer 1/4” TOOLS REQUIRED Ø 5/32” Household screw driver CSK Screw m4 x 32 Align connecting bolts 6x 2 B 4x STEP 2 Align con
DINING TABLE STEP 3 Assemble Base Panel ( Small) to the Legs. C C B 1 STEP 4 Align the Camlock 1 & turn it to locked position when it is connected to the bolts. Assemble Base Panel ( Large) to the Legs. D 1 Align the Camlock 1 & turn it to locked position when it is connected to the bolts. D STEP 5 Assemble the shelve to the Base Panels. 1 Align the Camlock 1 & turn it to locked position when it is connected to the bolts.
DINING TABLE STEP 6 Turn the Leg Base Upright for assembly the Mounting Bars. F 5 3 4 E 4x STEP 7 Turn the Table Base Upside Down to attach it to the Table Top. 6 6x MARKED LINES F A Turn the TABLE BASE upside down, attach the mounting bars to the underside of the TABLE TOP within the marked lines, align screws, and tighten them. Make sure all screws are fully tightened before turning the table table upright, by two adults or more.
