ASSEMBLY INSTRUCTIONS Style # WR1357 Wine Rack NOTE TO CUSTOMERS: For ease and speed of assembly we recommend that before you commence each step of the assembly that you identify all the parts required to complete that step. ‘We recommend that where possible you allow sufficient space to assemble the item as close as possible to the place where it will be once assembled. For the protection of your furniture we recommend that the product is placed on protected surfaces during assembly to prevent any damage.
To insert a cam lock: (Please read below instructions before assembling) Diagram A wa 1. Insert cam screw into hole as shown in diagram A . T [E]] Make sure not to insert the cam screw: Too deep as shown in figure B as this will cause the cam screw to be misaligned and unable to interlock properly. Diagram C Also avoid inserting the cam screw too close to the surface of the hole as shown in figure C, as this will cause the cam lock to be too loose, and not interlock 7 properly.
Part List Al. Quantity Quantity | A3, Quantity | Ad. Quantity Middle Shelf Panel Middle Divider Bottom Panel Right Side Panel 5. Quantity | Ag, AT. Quantity | Ag, Quantity Left Side Panel Top Panel Back Panel Cross Shelf A9, Quantity | A10, Quantity | A11, Quantity | A12, Quantity Drawer Side Panel Drawer Back Panel Left Drawer Front Panel Right Drawer Front Panel A13. Quantity | A14, Quantity | A15. Quantity | Al6. Quantity Drawer Bottom Panel Adjustable Shelf Right Door Al7.
Hardware List Bl Quantity [B2 Quantity [B3 Quantity |B4 Quantity Cam lock ‘Wood Dowel Screw Screw BS Quantity |B6 Quantity | B7 Quantity |B8 Quantity Screw Door Knob Shelf Support Magnet BY Quantity| B10 Quantity | B11, Quantity | gig Quantity Easement 7 Drawer Knob Stopper Anchor with Screw Anti-tip kit Step 1 SE Attach Stoppers (B10) to Middle Shelf Panel (A1) using included Screws (B10).
Step 2 1. Attach Magnets (B8) to the bottom of Middle Shelf Panel (A1) using included Screws (BY). 2. Attach Middle Shelf Panel (A1) to Middle Divider as shown above. Step poss | | B2: apes | Assemble Middle Dividers to Bottom Panel (A3) using Cam locks (B1) and Wood Dowels (B2).
Step 4 rear © B2: Specs IEEE __2 Assemble Middle Shelf Panel (A1) and Bottom Panel (A3) to Side Panels (A4&AS) using Cam locks (B1) and Wood Dowels (B2). Step 5 Assemble Top Panel (A6) to Middle Dividers and Side Panels (A4&AS5) using Cam locks (B1) and Wood Dowels (B2).
Step 6 1. Attach Support Leg (A17) to the bottom of bottom Panel (A3). 2. Attach Back Panel A7 to the back of this unit using Screws (B3). Step 7 Insert Cross Panel AS into the center of this wine rack as shown above.
Step 8 ] B7: _s=, Apes 1. Insert Shelf Supports B7 into the holes of Side Panels (A4 &A5) and Middle Divider 2. Put Adjustable Shelves (A14) onto Shelf Supports (B7). Fem mes a Step pests | mom sets Assemble Drawer Side Panels (A9) to Drawer Back Panel (A10) using Screws (B4). 2. Insert Drawer Bottom Panel (A13) into the grooves on Side Panels (A9). 3. Assemble Drawer Front Panel (A11/A12) to Side Panels (A9) using Screws (B4). 4.
1. Assemble Doors (A15&A16) to Side panel (A4 &AS) using Screws (BS). 2. Assemble Handle (B6) to Doors (A15&A16) using included Bolts (B6). 3. Insert the drawers as shown above. a APPENDIX: Dimension of Hardware in this Sower Sartre Be. BS. Screw Bolt Screw Alt BIL B12.
Bll o* # 1 Set B12 IRE (ge For your safety, please attached this unit to the wall by Anchor with screws B11 and Anti-tip kit B12.
