Installation Guide

Adjusting the Door Spring
Adjusting the Door Stop
Rotate the adjusting screw with the T20 bit
provided.
I = maximum spring tension
0 = no spring tension
(Optional) After adjusting the door spring,
attach the gray plastic sheets to hide the
adjusting screws.
Water Filter Bypass
Removing the Water Filter
it.
detailed instructions.
The default door stop position is 115°. Follow
these instructions to change the door stop
position to 90°.
1. Open the door to 90°.
2. Insert the door stop pin in the holes which are
rubber mallet to fully insert the pin.