THIS PAGE IS NOT A PART OF THIS INSTRUCTION MANUAL, PLEASE DON’T PRINT IT! DOREL HOME PRODUCTS B34321509801 Adjustable Bed Frame (Split) 203277 - FSD IM STATUS: APPROVED By Hichem LACHKHAB at 09:30 am, July 17, 2013 Issued by: Hichem LACHKHAB
215098 0 29986 32152 7 ADJUSTABLE BED FRAME (SPLIT) BROWN Adjustable for standard Queen, Full and Twin Box Springs. Weight limits: 500 lbs / 227 kgs DO NOT RETURN PRODUCT TO THE STORE STOP Individual stores do not stock parts. If a part is missing or damaged, call our toll-free customer service line. We will gladly ship your replacement parts FREE of charge. Need Parts or Assistance? 1-800-267-1739 or access our website www.dhpfurniture.
PARTS Twin (38.5" WIDE) B A C D FULL (53.5" WIDE) LEFT RAIL-1 T919060 QTY. 1 RIGHT RAIL-2 T912030 QTY. 1 RIGHT RAIL-1 T919070 QTY. 1 QUEEN (60" WIDE) LEFT RAIL-2 T912010 QTY. 1 G E H F FOOT T912040 QTY. 4 FOOTIE T912070 QTY. 9 CONNECTING PLATE T912050 QTY. 2 MID-FOOT T912060 QTY. 5 B G A I J I D J CENTER RAIL-1 T912970 QTY. 1 CENTER RAIL-2 T912980 QTY.
PARTS 1 2 Bolt M8 x 15 mm QTY: 9 Bolt M6 X 15 mm QTY: 8 5 4 3 Nut M6 QTY: 8 Nut M8 QTY: 6 WRENCH QTY: 1 6 7 HEX KEY-5mm QTY: 1 Bolt M8 x 18 mm QTY: 2 BLISTER PACK T3215098W-00 8 HARDWARE NOTE: Please do not completely tighten any screws until the entire assembly is complete.
1 Open the Rails (A, B, C & D) and pair the Rails (A & B) and (C & D) by attaching them to the Connecting Plate (G) using bolts (1) and Nuts (4), then attach Mid-Foot (F) by using bolt (1), as shown in detail (1).
2 Depending on the desired box spring size (Twin, Full or Queen), attach the Rails (A & C) and (B & D) to each other by sliding the shoulder rivets into the keyhole slots as shown below B Shoulder Rivets A D A C C QUEEN (60" WIDE) Keyhole Slots FULL (53.5" WIDE) Twin (38.
3 Attach Center Rails (J & I) and the Mid-foot (F) to the assembly by using bolts (1 & 7), as shown in detail (1 & 2). Note that the width of the bed rails can be adjusted to the width of box spring. Fix the Footie (H) to the legs. Note that Center Rails (J & I) and Mid-foot (F & H) are not needed for TWIN position.
4 YOU'RE DONE! " Use standard box spring and mattress " " Make sure angles are set to right angles (90°) " Twin Postion 90° 90° 90° 90° Full Position Queen Position 8 /13 B34321509801
3215098W ALTO Limites Del Peso: 500 lbs / 227 kgs NO REGRESE ESTE PRODUCTO A LA TIENDA Las tiendas no tienen partes. Si faltan partes o las partes están dañadas llame gratis a servicio al cliente. Con gusto mandamos las partes. Sin cargo alguno. Necesita partes o Asistencia? o visitar la página de internet www.dhpfurniture.com Para servicio mas rapido y reliable por favor tenga esta manual listo. ¡Visite www.friendly-fiber.
PÁGINA 05 Abra los Carrils (A, B, C y D) y un par de los Carrils (A & B) y (C & D) uniendo a la Conexión Placa (G) con tornillos (1) y nueces (4), luego coloque media del pie (F) mediante el uso de tornillos (1), como se muestra en detalle (1).
3215098W ATTENTION Limites DE Poids: 500 lbs / 227 kgs NE RETOURNEZ PAS LE PRODUIT AU MAGASIN Les magasins individiels ne gardent pas de pieces Si une piece manque ou endommagée, appelez notre numéro de téléphonesans frais pour assistance a la clientele. Nous enverrons avec plaisir les pieces de rechange sans frais Besoin des pièces ou de l'assistance? ou visiter notre site web www.dhpfurniture.com Pour un service rapide et fiable, s'il vous plait ayez votre livret d'assemblage en main. Visitez www.
PAGE 05 Les rails ouverts (A, B, C et D) sont des pairs de rails (A et B) et (C & D) reliant la plaque de raccordement (G) avec des vis (1) et les écrous (4) et placer le pied central (F) à l'aide du vis (1), comme indiqué en détail (1).
