8424222COM (Columbia Walnut) 8424335COM (Nightfall Oak) 8424340COM (Andover Oak) 8424341COM (Magnolia Oak) 8424344COM (Silverton Oak) 8424356COM (Monterey Oak) FULL SIZE DAY BED B348424000COM1 Date of Purchase ___ / ___ / ___ Lot Number: WARNING: * WARNING FOR YOUNG CHILDREN ‐ This product contains small components, please ensure that they are kept away from small children. Children under the age of 6, small infants and babies must not sleep on this bed for safety reasons.
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1‐800‐489‐3351 Monday‐Friday 9am ‐ 5pm CST Visit ameriwoodhome.com to view the limited warranty valid in the U.S. and Canada. You Tube Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 2 ‐ Open your item in the area you plan to keep it to avoid excessive heavy lifting. ‐ Identify, sort and count the parts before attempting assembly.
k Quic bly em Ass Ti p Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Parts are labeled on the surface or edge of the part Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight.
Board Identification Not actual size O C E B G I H M A K L D F J N ameriwoodhome.
Board Identification parts for 8424222COM (Columbia Walnut) Parts List PART ITEM QTY DESCRIPTION NUMBER A 1 38424335010 LEFT PANEL ASM B 1 38424335020 RIGHT PANEL ASM C 1 38424335031 TOP D 1 38424335041 BOTTOM E VALANCE 1 38424335051 F 1 38424335061 KICK G 1 38424335071 UPPER BACK PANEL H 1 38424335081 LOWER BACK PANEL I 1 38424335091 STOP RAIL J 1 38424335100 LEFT DOOR PANEL K 1 38424335110 RIGHT DOOR PANEL L 1 38424335120 CENTER DOOR PANEL M 1 38424335131 BOTTOM STRINGER 3 38424335140 N HANDLE MOLDING O
Board Identification parts for 8424341COM (Magnolia Oak) parts for 8424340COM (Andover Oak) Parts List PART ITEM QTY DESCRIPTION NUMBER A 1 38424341010 LEFT PANEL ASM B 1 38424341020 RIGHT PANEL ASM C 1 38424341031 TOP D 1 38424341041 BOTTOM E VALANCE 1 38424341051 F 1 38424341061 KICK G 1 38424341071 UPPER BACK PANEL H 1 38424341081 LOWER BACK PANEL I 1 38424341091 STOP RAIL J 1 38424341100 LEFT DOOR PANEL K 1 38424341110 RIGHT DOOR PANEL L 1 38424341120 CENTER DOOR PANEL M 1 38424341131 BOTTOM STRINGER
Board Identification parts for 8424356COM (Monterey Oak) parts for 8424344COM (Silverton Oak) Parts List PART ITEM QTY DESCRIPTION NUMBER A 1 38424356010 LEFT PANEL ASM B 1 38424356020 RIGHT PANEL ASM C 1 38424356031 TOP D 1 38424356041 BOTTOM E VALANCE 1 38424356051 F 1 38424356061 KICK G 1 38424356071 UPPER BACK PANEL H 1 38424356081 LOWER BACK PANEL I 1 38424356091 STOP RAIL J 1 38424356100 LEFT DOOR PANEL K 1 38424356110 RIGHT DOOR PANEL L 1 38424356120 CENTER DOOR PANEL M 1 38424356131 BOTTOM STRING
Note that your unit may contain extra hardware Part List Actual Size 1 2 #8x3-1/2" pan head #8x7/16" pan head cam lock 6 5 #8x5/8" flat head 8 7 (x4) #A43020 (x16) #A12400 (x22) #A22610 (x8) #A13950 (x24) #A12105 (x22) #A22620 4 3 (x20) #A21660 glide (x9) #A25400 wood dowel washer cam bolt 9 (x16) #A22910 connector bolt 14 ATTENTION / ATENCION / ATTENTION (x1) #B64481 10 warning label 12 11 (x16) #A22920 connector 13 (x43) #A13020 (x4) #A20330 #8x1-1/4" pan head ameriwo
Bed Frame Identification Not Actual Size Note: Not all parts will be identified.
VERY IMPORTANT INFORMATION INFORMACION MUY IMPORTANTE INFORMATION TRÊS IMPORTANTES ameriwoodhome.
STEP 1 1 (x6) 7 9 (x4) (x4) 7 1 Proper orientation of Cam Lock 1 G Proper orientation of Cam Lock FLIP 7 G 9 ameriwoodhome.
STEP 2 1 7 (x4) (x4) 7 Proper orientation of Cam Lock 1 H 1 Proper orientation of Cam Lock 7 ameriwoodhome.
STEP 3 1 7 (x2) (x4) 7 1 Proper orientation of Cam Lock M 1 7 ameriwoodhome.
STEP 4 1 7 (x4) 10 (x2) (x6) Proper orientation of Cam Lock 7 1 Proper orientation of Cam Lock D FLIP 1 7 D 10 Proper orientation of Connector ameriwoodhome.
STEP 5 9 (x12) E 9 F ameriwoodhome.
STEP 6 1 7 10 (x10) (x2) (x4) Proper orientation of Cam Lock 1 Proper orientation of Connector 10 7 Proper orientation of Cam Lock 1 C 10 Proper orientation of Connector 7 ameriwoodhome.
STEP 7 4 7 (x11) (x3) 4 4 A ameriwoodhome.
STEP 8 5 The Left Pivot Arm (21e) is located in the 4813096COM Day Bed Mechanism box (x8) A 5 5 5 5 5 5 21e A ameriwoodhome.
STEP 9 4 7 (x11) (x3) 4 7 4 B ameriwoodhome.
STEP 10 5 (x8) The Right Pivot Arm (21f) is located in the 4813096COM Day Bed Mechanism box B 5 5 5 5 5 5 5 21f B ameriwoodhome.
STEP 11 turn clockwise to lock in place C E raw ameriwoodhome.
STEP 12 raw edge G x4 turn clockwise to lock in place ameriwoodhome.
STEP 13 x5 UNLOCK LOCK G A ameriwoodhome.
STEP 14 D x6 raw edge UNLOCK H M G A ameriwoodhome.
STEP 15 B x11 UNLOCK LOCK ameriwoodhome.
STEP 16 12 6 (x4) (x4) Lay the unit onto its front 12 6 ameriwoodhome.
The next steps are to assemble your unit to the wall Assembled unit MUST be square on the height, width, and depth to function properly Assembled unit MUST be placed flat against the wall Assembled unit MUST be screwed into wall studs at the top and bottom for safety You need to locate at least 3 studs, but 4 is better DO NOT use wall anchors to fasten your unit to the wall For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach your uni
STEP 17 Place your unit FLUSH against the wall There are notches provided at the back of your unit. These notches are to fit around the baseboard on your wall. If your baseboard is higher or thicker than the notches provided on the unit, you will need to remove the baseboard, cut it down to fit on both sides of your unit, then refasten to the wall. ameriwoodhome.
STEP 18 Assembled unit MUST be flush on the height, width, and depth to function properly If required, unscrew the Glides counter-clockwise as necessary in all 4 corners until your unit is level in all directions ameriwoodhome.
STEP 19 Locate the studs in the wall, using a stud finder. Using a pencil, mark the stud locations on the upper surface of the Upper Back Panel (G). Using a level, carry the stud locations down to the Bottom Stringer (M), and with a pencil, mark the stud locations. You need to locate at least 3 studs, but 4 is better G A ladder will be required Do not lean against the top of the unit, it may cause sagging M ameriwoodhome.
STEP 20 3 (x8) First, make sure that your unit is still level in all directions. Drill 1/8" (3mm) pilot holes through the Upper Back Panel (G) and Bottom Stringer (M) at the stud locator marks. Fasten the unit to the studs in the wall with the Screws (3). G A ladder will be required Do not lean against the top of the unit, it may cause sagging M ameriwoodhome.
The next steps are to assemble the metal bed frame and mechanism These parts are located in the #4813096COM Full Size Day Bed Mechanism Carton ameriwoodhome.
STEP 21 21s 21o 21u (x4) (x1) 21o (x3) 21o press in each hole 21a 21u 21c 21a 21b 21o 21o 21a 21b ameriwoodhome.
STEP 22 21s 21o 21q 21i (x1) 21q 21i (x4) 21o 21q (x8) 21o (x8) 21a 21b ameriwoodhome.
STEP 23 21p 21s 21d (x2) (x1) (x4) 21d 21p 21p 21a ameriwoodhome.
STEP 24 21h 21n 21l (x2) (x2) (x2) 21h The "long" end of both pistons is to be fastened here 21h 21l 21n 21n 21l 21a 21b The ends of both pistons need to be inserted into the groove of the bed frame when assembled. ameriwoodhome.
STEP 25 21s 21p (x1) (x2) 21k (x2) The cabinet is not shown to allow a clear view of the bed frame assembly Already fastened to your unit 21p 21p 21k 21k Already fastened to your unit 21a 21b With a person on each side, lift the bed mechanism, line up the holes of the Bed Assembly with the large bushing hole of the Left and Right Pivot arm (21e & 21f) already installed to your unit, and insert the Pivot Pins (21k) as shown. Secure the pivot pins with a 10mm Bolt (21p).
STEP 26 21t 21r (x1) (x2) With a person on each side, carefully lift the bed frame in the closed position. While one person pushes the bed frame into the cabinet, passed the 90 degrees, the other person is to engage the Gas Piston (21h) on each side of the unit, to the pin of the Left and Right Pivot Arm (21e & 21f). Then tightly secure with both Nuts (21r). push here into cabinet 21e 21h 21r ameriwoodhome.
STEP 27 21n 21m 14 ATTENTION / ATENCION / ATTENTION (x2) (x2) (x1) 21n The cabinet is not shown to allow a clear view of the bed frame assembly 21m Pull the bed frame down, then attach Leg (21c) as shown 14 Apply Warning Label here 21c 21n The bed frame is equipped with a locking mechanism to lock the Leg (21c) in place. To lock or unlock the leg, pull on the locking mechanism. 21m ameriwoodhome.
STEP 28 11 2 (x3) (x8) 8 13 (x4) (x3) 2 Proper orientation of bracket 2 13 r aw ed ge J 11 x3 8 N Handle Molding (N) is to be centered on the Left Door Panel (J) ameriwoodhome.
STEP 29 11 2 (x3) (x8) 8 13 (x4) (x3) Proper orientation of bracket 2 r aw 13 ed ge L 11 x3 N 8 Handle Molding (N) is to be centered on the Center Door Panel (L) ameriwoodhome.
STEP 30 11 2 (x3) (x8) 8 13 (x4) (x3) Proper orientation of bracket 2 2 r aw 13 ed ge K 11 x3 N 8 Handle Molding (N) is to be centered on the Right Door Panel (K) ameriwoodhome.
STEP 31 13 Support Rail With the help of another person, lift the Left Door Panel (J), position the Brackets (13) over the two Support Rails of the Bed Frame, and drop into position. Repeat the procedure for the Center Door Panel (L) & Right Door Panel (K). IMPORTANT: First, unlock and flip the leg into the cabinet. Then, lower the bed frame down a bit to allow clearance to hook Door Panels (J,K & L). J L K The cabinet is not shown to allow a clear view of the bed frame assembly ameriwoodhome.
STEP 32 11 (x30) With the help of another person, carefully pull the bed frame open Line up the holes of the bed frame with the holes in Panels (J,K & L), and fasten with Screws (11). 11 J L K The cabinet is not shown to allow a clear view of the bed frame assembly ameriwoodhome.
STEP 33 11 21j 21g (x4) (x56) (x28) A ladder will be required Do not lean against the top of the unit, it may cause sagging 21j 21g 11 Fasten Stop Rail (I) to the underside of Top (C) with Screws (11) C I finished edge 21j Press a Plastic Cap (21j) at each end of a Wood Slat (21g). Press both Plastic Caps (21j), attached to the Wood Slat, into the holes of the Metal Bed Frame. Repeat the procedure for all 28 wood slats and 56 plastic caps.
STEP 34 O Front of unit is not shown to allow a clear view of the kick and bottom While one person slightly opens the bed frame and holds it in place, insert the connector bolts installed in the Kick (F) into the connectors of the Bottom (D). Turn the connectors clockwise to lock in place. raw ed ge open frame slightly F D x6 D F ameriwoodhome.
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. This bed is designed to accommodate a Full Size Mattress, up to 10" inches thick. * with a maximum weight of 60 lbs (27.2 kgs) * with a minimum weight of 30 lbs (13.
Register your product to receive the following: * New trend details ‐ sneak peek on what's new * Surveys ‐ have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit ameriwoodhome.
Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1‐800‐489‐3351 (Gratis) Lunes ‐ Viernes 9am ‐ 5pm CST Visitar: www.ameriwoodhome.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte. Anclar el mueble a un poste de madera en la pared (si esto se requiere).
Español Sistema de fijar el bloqueo de leva (página 3) Esta sistema de fijar el bloqueo de leva sera usado en todo el proceso ensamble. Página 8 Tenga en cuenta que su unidad puede contener hardware adicional Página 9 Nota: No se identificarán todas las piezas. Página 11, 12, 13, 14, 16 orientación adecuada del bloqueo de la leva dale la vuelta orientación adecuada del connector Página 18 El brazo del Pivote Izquierdo (21e) se localiza en el 4813096COM caja del Mecanismo de la Cama del Día.
Español Página 28 Coloque su unidad al ras contra la pared Hay muescas en la parte posterior de su unidad. Estas muescas deben encajar alrededor del zócalo de la pared. Si su zócalo es más alto o más grueso que las muescas provistas en la unidad, deberá quitar el zócalo, cortarlo para que quepa en ambos lados de su unidad y luego volver a fijarlo a la pared. Página 29 La unidad ensamblada DEBE estar nivelada en altura, ancho y profundidad para funcionar correctamente.
Español Página 36 El extremo "largo" de ambos pistones debe fijarse aquí. Los extremos de ambos pistones deben insertarse en la ranura del marco de la cama cuando se ensamblan. Página 37 Ya fijado a su unidad Con una persona a cada lado, levante el mecanismo de la cama, alinee los orificios del conjunto de la cama con el orificio del buje grande del brazo de pivote izquierdo y derecho (21e y 21f) ya instalado en su unidad e inserte los pasadores de pivote (21k) como se muestra.
Español Página 43 Carril de soporte Con la ayuda de otra persona, levante el panel izquierdo de la puerta (J), coloque los soportes (13) sobre los dos raíles de soporte del armazón de la cama y déjelo caer en su posición. Repita el procedimiento para el panel central de la puerta (L) y el panel derecho de la puerta (K). IMPORTANTE: Primero, desbloquee y coloque la pata en el gabinete. Luego, baje un poco el marco de la cama para dejar espacio para enganchar los paneles de la puerta (J y K y L).
Español Página 47 CARGA MAXIMA Esta unidad ha sido diseñada para soportar la carga máxima anotada. El exceder estos límites puede causar inestabilidad, colapsarse y/o causar serias lesiones. Esta cama está diseñada para acomodar un colchón tamaño Full, de hasta 10" pulgadas de grosor. * con un peso máximo de 60 libras (27.2 kgs) * con un peso mínimo de 30 libras (13.
Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez‐nous: 1‐800‐489‐3351 (sans frais) du Lundi au Vendredi de 9h à 17h Heure Centrale Visitez: www.ameriwoodhome.com ATTENTION Le meuble peut basculer et causer des blessures graves ou la mort.
Français Système de Fixation de Came (page 3) Ce Système de Fixation de Came sera utilisé tout au long de l'assemblage Page 8 Notez que votre appareil peut contenir du matériel supplémentaire page 9 Remarque: les pièces ne seront pas toutes identifiées. Page 11, 12, 13, 14, 16 bonne orientation du verrou à came retourner bonne orientation du connecteur Page 18 Le bras pivotant gauche (21e) est situé dans la boîte du mécanisme de lit de jour 4813096COM.
Français Page 28 Placez votre appareil contre le mur Il y a des encoches à l'arrière de votre appareil. Ces encoches doivent s'adapter autour de la plinthe sur votre mur. Si votre plinthe est plus haute ou plus épaisse que les encoches fournies sur l'unité, vous devrez retirer la plinthe, la couper pour qu'elle s'adapte des deux côtés de votre unité, puis la remettre au mur.
Français Page 36 L'extrémité "longue" des deux pistons doit être fixée ici Les extrémités des deux pistons doivent être insérées dans la rainure du cadre de lit une fois assemblées. Page 37 Déjà attaché à votre appareil Avec une personne de chaque côté, soulevez le mécanisme du lit, alignez les trous de l'assemblage du lit avec le grand trou de douille des bras de pivot gauche et droit (21e et 21f) déjà installés sur votre unité, et insérez les broches de pivot (21k) comme montré.
Français Page 43 Rail de support Avec l'aide d'une autre personne, soulevez le panneau de porte gauche (J), placez les supports (13) sur les deux rails de support du cadre de lit et faites‐les tomber en position. Répétez la procédure pour le panneau de porte central (L) et le panneau de porte droit (K). IMPORTANT: Tout d'abord, déverrouillez et retournez le pied dans l'armoire. Ensuite, abaissez un peu le cadre du lit pour permettre le dégagement d'accrocher les panneaux de porte (J et K et L).
Français Page 47 CHARGES MAXIMALES Ce meuble a été conçu pour supporter les charges maximales indiquées. En excédant ces limites de charge, le meuble pourrait devenir instable, s'effondrer, et/ou causer des blessures graves. Ce lit est conçu pour accueillir un matelas double, jusqu'à 10 pouces d'épaisseur. * avec un poids maximum de 60 livres (27.2 kg) * avec un poids minimum de 30 livres (13.
