User Guide

ManualsBrandssignify ManualsEmergencysignify Chloride Exit/Emergency Compac CLU2, CLU3

Ordering guide

Example: CLU2NWTD

Series Battery Color

Options

CLU2 Compac LED emergency unit,

2 lamps

N Nickel Metal Hydride battery W White finish

B Black finish

Remote capability

Time delay

Laser testing

Less lamp heads

Less Self-test feature

CLU3 Compac LED emergency unit,

3 lamps

N Nickel Metal Hydride battery W White finish

B Black finish

Remote capability

Time delay

Laser testing

1. Optional features cannot be combined with other optional features

2. CLU2 feeds 2 single or 1 dual LED remote unit

3. 15 minute delay

4. Performs a manual test up to 40ft from unit, See RLT accessory for laser tester

5. Available in white finish housing only, feeds 4 single or 2 dual LED remote lamp

heads

6. Contains self-diagnostic electronics but does not perform the automatic

monthly test. Available in white finish housing only

7. CLU3 unit with the 1R option feeds 1 LED remote lamp head

CLU2

CLU3

Accessories (order separately)

• WG5 - Wire guard (for CLC exit/unit combos mounted flat against the wall)

• RLT - Remote Laser Tester

Compac

Emergency unit CLU2, CLU3

Project:

Location:

Cat.No:

Type:

Lamps: Qty:

Notes:

Exit/Emergency

The Chloride Compac emergency units were designed to complement

the Compac exit/emergency family in looks and reliability. They allow

for immediate and safe egress in low light situations and work in

harmony within commercial and light industrial applications. The CLU2

two lamp head model can be adjusted to provide the optimum amount

of illumination. The CLU3's center lamp head is stationary while the

two side lamps can be adjusted for the perfect left and right angles.

These units come standard with self-diagnostic/self-test features to

assure that they are ready at any time.

Compac_emerg_CLU2_3 www.chloride-lighting.com 02/21 page 1 of 3

Summary of content (3 pages)

PAGE 1
CLU2 Project: Exit/Emergency Location: Cat.No: Compac Type: CLU3 Lamps: Emergency unit CLU2, CLU3 Qty: Notes: The Chloride Compac emergency units were designed to complement the Compac exit/emergency family in looks and reliability. They allow for immediate and safe egress in low light situations and work in harmony within commercial and light industrial applications. The CLU2 two lamp head model can be adjusted to provide the optimum amount of illumination.
PAGE 2
CLU2/CLU3 Compac emergency unit Dimensions CLU2 CLU3 2-5/8" (77mm) 2-5/8" (77mm) 4-3/4" (120 mm) 4-3/4" (120 mm) 10-1/4" (260mm) 10-1/4" (260mm) Performance Meets Life Safety Code Illumination standard average of 1.0 FC, no point less than 0.1 FC max to min ratio of 40:1. Assumes open space with no obstructions. NFPA 101, Life Safety Code matches California Fire Code of Regulations, Title 24. Normal operation (off/standby) is not to be confused with emergency operation.
PAGE 3
CLU2/CLU3 Compac emergency unit Codes and standards Lamps Self-diagnostics/Self-test • NFPA 70 (National Electric Code) • CLU2 unit contains two - 2.2W adjustable LED lamp heads longlife LED lamp source head (5000K) The CLU2/3 units contain selfdiagnostic/self-test electronics as a standard feature. An automatic self-test is performed every month for 3 minutes, and a 30 minute self-test every six months. A manual test may also be performed at anytime by pressing the manual test button.