Specifications

RDI DRIVERS FOR THIRD PARTY ARM DEBUGGERS

WITH JTAGJET

2. Start the gdb debugger. To

establish connection with the

GDBserver, run “target remote

<host>:<port>” command, as

shown in the following

examples.

• To connect to the server from a remote host computer named

“celeronti” via port 9000, enter:

target remote celeronti:9000

• To connect to the server on the local machine, enter:

target remote localhost:9000

As another example, the beginning of a remote debug session might look like

this:

$ arm-elf-gdb x.elf

GNU gdb 5.3

GDB is free software, covered by the GNU General

Public License, and you are

welcome to change it and/or distribute copies of it

under certain conditions.

Type "show copying" to see the conditions.

There is absolutely no warranty for GDB. Type

"show warranty" for details.

This GDB was configured as "--host=i686-pc-cygwin -

-target=arm-elf"...

(gdb) target remote celeronti:9000

Remote debugging using celeronti:9000

main () at x.c:34

34 a = 0;

(gdb) load x.elf

Loading section .text, size 0x1f10 lma 0x8000

Loading section ..rodata, size 0x29 lma 0x9f10

Loading section .data, size 0x850 lma 0xa03c

Loading section .ctors, size 0x8 lma 0xa88c

Loading section ..dtors, size 0x8 lma 0xa894

Note: The server folder contains the

cygwin1.dll library file. You may want

to rename this file if it is in conflict

with your version of cygwin1.dll.