Specifications

SIGNUM SYSTEMS

column, click on the device you want to debug. Note that you cannot

select a bypass device (see Figure 17):

FIGURE 26 Selecting a multi-device JTAG chain.

• Click the Advanced Parameters button. Select ARM from the

Emulation Mode drop-down list for all but TI ARM925-based

processors. For the TI ARM925-based devices, like OMAP1510,

OMAP5910, OMAP710, OMAP310, or OMAP331, choose TI

Emulation Mode (Figure 27).

Leaving the JTAG Clock and JTAG Header fields empty lets the

emulator select those parameters automatically, depending on the

processor type. However, when using the JTAG probe labeled TI-14

(formerly TMS320), TI-14-ISO (formerly ISO-TMS320), or CTI-20,

select the TI JTAG Header option. Otherwise, the emulator may

incorrectly report that the processor is held in reset.