TV Mount User Manual

ManualsBrandsSIIG ManualsTV Mount04-0621A

04-0621A

Max load capacity:100 lbs

Tilt angle: 0-12 degrees

Installation and Operating Instructions

Wall distance: 3.75" / 95mm

Built-in bubble level

Universal Mounting Pattern

Full Motion TV Mount - 23" to 42"

IMPORTANT: If you have difficulty following or understanding these installation instructions,

please consult a qualified service technician.

Full-motion/articulating universal LCD/Plasma TV wall-mount

TV size: 23" - 42"

Summary of content (8 pages)

PAGE 1
Full Motion TV Mount - 23" to 42" Installation and Operating Instructions Full-motion/articulating universal LCD/Plasma TV wall-mount TV size: 23" - 42" Tilt angle: 0-12 degrees Max load capacity:100 lbs Wall distance: 3.75" / 95mm Built-in bubble level Universal Mounting Pattern IMPORTANT: If you have difficulty following or understanding these installation instructions, please consult a qualified service technician.
PAGE 2
INSTALLATION AND OPERATING INSTRUCTIONS Caution Prior to the installation of this product, the installation and operating instructions should be read and completely understood. The installation and operating instructions must be read to prevent personal injury and property damage. Keep these installation and operating instructions in an easily accessible location for future reference. CAUTION: The maximum load capacity is 100 lbs.
PAGE 3
Tools Required: 1 Phillips head screw driver 2 Stud finder for drywall installation 3 5/16" Socket and Wrench 4 Electric drill, 3/16 drill bit for wood stud installation, and 1/2" (12mm) masonry bit for concrete/brick installation Note: Please ensure that the bubble level is properly mounted on the wall plate prior to mounting the wall plate. Step1: Wall Plate Installation a) Wood Stud Installation Note: When mounting to wood studs, the two wood studs must be a minimum of 16" apart.
PAGE 4
b) Concrete / Brick Installation Note: The concrete anchors must be used for concrete and brick installation. 1 2 Begin by placing the wall plate into position against the wall, using the bubble level to keep it level. Locate the holes directly into the block or concrete, never into the mortar between the blocks (Figure 2). Mark six holes to be used for securing the mount and place the wall plate aside.
PAGE 5
Step 3 Final Installation & Adjustment 1 Hang the display plate onto the top of the wall plate and slip onto the wall plate as shown (Figure 5). 2 Tilt the display to the desired angle (Figure 6). 3 Tighten the middle screw to secure the tilt angle (Figure 7). 4 Tighten the bottom screw to lock the bracket (Figure 8). 5 Secure the cables from your LCD TV / Monitor using the supplied cable ties (Figure 5 & Figure 9).
PAGE 6
Blank Page 6
PAGE 7
Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analysts will promptly respond. SIIG offers a 5-year manufacturer warranty with this product. Please see our web site for more warranty details.
PAGE 8
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/Notebook systems and external peripherals. SIIG continues to grow by adding A/V and Digital Signage connectivity solutions to our extensive portfolio.