Articulating Monitor Desk Mount - 13" to 27" Installation Instructions 04-0680B 1
Unpacking • • • Carefully remove contents and lay out on cardboard or other protective surface Check package contents against the parts list to ensure that all components were received undamaged.
Parts List a - (1x) 35mm b - (1x) C Clamp Tube Support d - (4x) M4x12 Bolt h - (2x) Wire Clip c - (1x) Vesa Plate with Arm f - (8x) M4 Washer (4x) M4 Spacer j - (1x) Allen Key k - (2x) Spare e - (4x) M4x30 Bolt i - (2x) M10x15 Bolt Plastic Cover Tools Required • Phillips screwdriver Installation Caution: This monitor desk mount must be securly attached to the horizontal desktop. If the mount is not properly installed it may fall, resulting in possible injury and/or damage.
1. 4 Install the C Clamp (b) to the 35mm Tube Support (a) according to the thickness of the desktop. The thickness can be changed in three positions. Connect it using 2 M10x15 Bolts (i) and tighten using the Allen Key (j). Tighten the C Clamp to the desktop using the 2 eye bolts.
2. Install the Vesa Plate with Arm (c) to the tube support, make sure the wire clips are on the bottom. Tighten the clamp bolt using the Allen Key (j). Caution: When installing the VESA Plate with Arm (c), DO NOT over tighten the clamp bolt. The VESA Plate with Arm is intended to rotate (360 degrees) and is not meant to be attached in a fixed position. Tighten the bolt only tight enough to keep the VESA Plate with Arm at the desired height position.
3. Mount the monitor to the Vesa plate. 3-1. For flat back monitors use M4x12 Bolt (d) and M4 Washer (f).
3-2. For curved back monitors use M4 Spacer (g), M4x30 Bolt (e) and M4 Washer (f).
4. Adjust the height and install the Wire Clips (h).
5. Check the tightness, arrange the cables through the wire clips, and make any final adjustments.
Blank Page 10
Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analyst will promptly respond. SIIG offers a 5-year manufacturer warranty with this product.
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/ O adapters) that bridge the connection between Desktop/Notebook systems and external peripherals. SIIG continues to grow by adding A/V and Digital Signage connectivity solutions to our extensive portfolio.
