ProMini Keyboard User Manual （V1.
Contents 1. SAFETY MATTERS .................................................................................................................................. 3 2. OVERVIEW ................................................................................................................................................ 4 3. INTRODUCTION....................................................................................................................................... 5 3.1. PRODUCT OVERVIEW .............
1. Safety Matters Safety Matters To avoid injury, death of personnel or damage to the equipment the operator must refer to an explanation in the User’s Manual. Battery: There is a piece of lithium-ion rechargeable battery in this device. Don’t water this device, or take it in the humid environment for long time, or the device will be damaged. Attention to traffic safety (CAR PC): Do not use the device while driving. If you want to use, please park the car.
2. Overview This is wonderful combo, 2.4G Wireless Mini QWERTY Keyboard & Touch Pad & Presenter Combo, with USB interface receiver. Operating frequency: 2.4GHz ISM band, Dimension: 151.4mmX59mmX12.5mm This product is not only with the normal wireless keyboard input, but also with multimedia control keys, wireless PC gaming control keys. It has built-in programmable smart touch pad - the world's first Touchpad which can be used from horizontal and vertical.
Delicate appearance, clever keyboard layout, a real mini-QWERT full-function keyboard. 3. Introduction 3.1. Product overview 3.2. About Keyboard Keyboard Description Numeric keys / letter key / function key F1-F8 / duplicate multimedia keys F1-F8 advanced computer function key, simultaneously press the "Fn" key to work as multimedia keys 1. navigation keys: PgUp，PgDn，Home，End 2.
left mouse key Right mouse key 1. Backspace key / Del key 2. Del key – press this key together with "Fn" key Backlight control key - default backlight turn off, and if want to turn on, you need press this key 3.3. Introduction touchpad Touch Pad icon The use of touch pad is normally horizontal. If you want to use by from vertical, press below shown keys to make change. 3.4. Laser Head Description Laser head icon Open the laser head, you need press the laser button shown 3.5. Wireless 2.
Started 3.6. Connect receiver Plug out the receiver from the side of this product, and insert to the devices with a standard USB interface, and then switch machine keys to the "ON" position, to complete the connection. 3.7. Process of use Type the left Qwerty keyboards you can use it as input device, moving on the touch pad can control the cursor, do the same function as mouse.
Note: Before the first time use of the equipment, the battery must be fully charged. * Use the travel charger – this is optional part of this equipment, provided by required only. 1. Connect the travel charger with the device through the USB connector at left, the arrow shown on the charger need be in the same direction of the device. like: , then connect the travel charger with AC power. 2. The device can be recharge via data lines which directly connect with standard USB port on the computer. 3.
Make the device at the ON position (no need to connect 2.4G receiver to USB interface) Press the key when using, release the hand, the laser will automatically shut down. So, if you want to continue to open the laser, you need to always press the laser button. 4.7. RF matching The device was set well by factory , you can ensure that different users on the same occasion using both 2.4G devices won’t interfering with each other.
The battery can be charged and discharged hundreds of times, but eventually wear out. When the battery operating time was significantly shorter than usual, it’s time to replace the battery, please contact your local dealer. A charged battery without use within a certain period will be self-discharge. Use the specified charger. When the charger not in use, please cut off the power, do not let the battery connected to a charger more than a week, over-charging will shorten battery life.
RF can’t be connected after a long time light blinking 1. Receiver Inserted correctly or not, the inserted device is in boot state or not. 2. The signal is too weak at your physical location, or there is a wireless interference. 1. Check if the receiver inserted correctly and the inserted device in the boot state. 2. Move your location, make sure there’s no interference between you and the inserted device. Operation of the mouse pointer jumping, or unresponsive 1.
