Installation guide

6
4. Turn on an appliance connected to the Power Save
(Switched) outlets.
Note: The display will show the cumulative power
consumption of the Power Save outlets only.
5. The A/V PowerSaver Pro will automatically detect
variations of total power consumption and if the
total power consumption lowers by over 70% for 3
consecutive minutes the Power Save (Switched)
outlets will be turned off and the A/V PowerSaver
Pro will be placed into standby mode.
Note: Only the Power Save (Switched) outlets are
turned off, the Always On outlets are still on.
6. Repeat step 3 to turn on the Power Save (Switched)
outlets and connected peripheral devices again once
the A/V PowerSaver Pro has been placed into standby
mode.