Datasheet

ManualsBrandsSIIG Manualscomputer componentsCB-H20C11-S1

Micro HDMI to VGA

with Audio Adapter

Quick Installation Guide

Introduction

The Micro HDMI to VGA with Audio Adapter converts HDMI

signals from a portable device, such as a laptop, smart phone or

tabletPCtoVGAwithanaloganddigitalS/PDIFaudio

Key Features and Benefits

 CompliantwithHDMIspecification

 Supportsupto1920x1080resolution

 Supports1080pwithaon‐chip16‐bitDAC

 HDMIreceiverwithequalizer



 On‐chipAudioDecodertosupport2‐channelIIS(analog,

3.5mm)andS/PDIFdigital(optical)audiooutputs

 Supportsaudiosoftmute

 Lowstand‐bycurrentatpowerdownmode

System Requirements

 MicroHDMIequippeddevices

 Windows

 7 (32‐/64‐bit) / Vista (32‐/64‐bit) / XP (32‐/64‐bit)

andlater

 Android

2.3ornewer

Package contents

 MicroHDMItoVGAwithAudioAdapter

 MicroHDMItoMicroHDMIcable(D‐Type)

 USBtoDCcable

 QuickInstallationGuide



04‐0795A

Summary of content (8 pages)

PAGE 1
Micro HDMI to VGA with Audio Adapter Quick Installation Guide Introduction The Micro HDMI to VGA with Audio Adapter converts HDMI signals from a portable device, such as a laptop, smart phone or tablet PC to VGA with analog and digital S/PDIF audio Key Features and Benefits        Compliant with HDMI specification Supports up to 1920x1080 resolution Supports 1080p with a on‐chip 16‐bit DAC HDMI receiver with equalizer On‐chip Audio Decoder to support 2‐channel IIS (analog, 3.
PAGE 2
Layout Figure 1: Front Panel Layout 1. 3.5mm audio jack: Connect to speakers or earphone/ headphone 2. SPDIF output: Connect to a S/PDIF speakers 3. VGA connector: Connect to a monitor or projector 4. Volume buttons:  Press and hold A button to decrease the volume. Press and hold B button to increase the volume.  Press A and B buttons at the same time to mute. To cancel mute, press any button. Note: This function is only available when connecting to analog speakers.
PAGE 3
Specifications  Host interface: Micro HDMI (D‐Type)  HDMI input:  Output:  Audio: Micro HDMI (D‐Type) VGA connector 3.5mm phone jack & SPDIF jack  Dimension: 65 x 60 x 22mm ( LxWxH ) approx.  Housing Material:  Power Mode: Plastic Bus Power 5V & Self Power 5V  Power consumption:  Resolution: 1675 mW Max.
PAGE 4
Installation This adapter is plug‐n‐play and there’s no driver installation needed. Please note that most installation problems occur with the resolution mismatch between the source device and monitor. Please make sure the VGA monitor/projector is capable of supporting the resolutions outputted from source device, such as a portable device or computer.  Do not attempt to service the unit yourself.  Provide proper ventilation and air circulation, do not use near water.
PAGE 5
6. 7. Power on your display, then the rest of the devices connected to this adapter. Installation is complete. Resolution This adapter is plug‐n‐play and the resolution will be adjusted automatically once the adapter is plugged in. To adjust the resolution in Windows on your computer, please follow the steps below. For portable devices, adjusting resolutions on the new monitor may not be possible.
PAGE 6
Audio Settings in Windows If there’s no audio output to the analog or S/PDIF jacks in Windows, go to Control Panel and change the default audio output settings to this new adapter. Note: The example shown here is from Windows 7. Other Windows operating systems will look slightly different.
PAGE 7
Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our website at www.siig.com and click on Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and one of our technical support analysts will promptly respond. SIIG offers a 3-year manufacturer warranty with this product.
PAGE 8
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/ Notebook systems and external peripherals. SIIG continues to grow by adding A/V and Digital Signage connectivity solutions to our extensive portfolio.