Datasheet

4
Installation
This adapter is plug‐n‐play and there’s no driver installation
needed.Please note that most installation problems occur with
the resolution mismatch between the source device and monitor.
Please make sure the VGA monitor/projector is  capable of
supportingtheresolutionsoutputtedfromsourcedevice,suchas
aportabledeviceor
computer.
 Donotattempttoservicetheunityourself.
 Provideproperventilationandaircirculation,donotuse
nearwater .
 Keepobjectsthatmightdamagethedeviceasafe
distanceawayandplacetheunitonastablesurface.
 UseonlytheUSBpowercablethat
camewiththeunit.
 Donotuseliquidoraerosolcleanerstocleantheunit.
Always disconnectthepowertotheunitbeforecleaning.
1. Poweroffalldevicesconnectedtothisadapter.
2. ConnecttheMicroHDMItoMicroHDMIcabletothe
adapter’sMicroHDMIconnector,thenportable
deviceor
computer.
3. [Optional]Connect the USB power cable to your
system’sUSBport(whereapplicable).
Note:Thisisoptional
andnotneededinmostcases.If
the Micro HDMI connection doesn’t provide enough
power,poweroffalldevices, connectthiscable,thenturn
onallconnecteddevices.
4. PlugoneendofVGAcable(notincluded)totheadapter
andotherendtoamonitororprojector.
5. Connect
thespeakersorearphonetothe3.5mmaudio
jack.Alternatively,youcanconnectyourS/PDIF
speakerstotheS/PDIFjack.



Note: DO NOT use the earphone continuously for long time.
Exposure to high sound levels will impair your hearing and prolonged
use ma
y
cause hearin
g
defects re
g
ardless of the volume levels