Datasheet

6
Charging Portable Devices using the included
USB Charging Cable
When your portable device is out of battery, you can
recharge it with the Portable Battery Charger - 7200 easily.
Just make sure the Portable Battery Charger - 7200 is fully
charged before proceeding.
1. Connect the USB Type A tip of the included USB
charging cable to the OUTPUT port (USB Type A
port) of the Portable Battery Charger - 7200. See
Figure 5.
2. Plug the Micro USB tip of the included USB charging
cable into the Micro USB charging port of your
portable device. See Figure 5.
3. Press and hold down briefly the charger's power
button until the LEDs come on to signal charging
has begun. If you need to stop charging at any time,
simply press and hold down the charger's power
button again until the LEDs go off or unplug the
charging cable from the portable device.
Figure 5