Datasheet

7
Charging Portable Devices using the Device's
USB Charging Cable
When your portable device is out of battery, you can
recharge it with the Portable Battery Charger - 7200 easily.
Just make sure the Portable Battery Charger - 7200 is fully
charged before proceeding.
1. Connect the USB charging cable (supplied with the
device) to your portable device.
2. Plug the Type A USB connector of the USB charging
cable (supplied with the device) into the OUTPUT
port (USB Type A port) of the Portable Battery
Charger - 7200. See Figure 6.
3. Press and hold down briefly the charger's power
button until the LEDs come on to signal charging
has begun. If you need to stop charging at any time,
simply press and hold down the charger's power
button again until the LEDs go off or unplug the
charging cable from the portable device.
Figure 6