Installation guide

20
Reset Player to Factory Default
If you forget a system password you have set, you must reset the system to
regain access to the player.
1. PRESS and hold the reset button with a pin
2. Re-connect the power cord
3. In about 8 seconds, the status LED flashes
4. Release reset button and wait 90 seconds for system to initialize
Content Management
Please consult the software documentation for information specific to your
management solution.
Troubleshooting
Why is there no video output on composite video connectors?
The player outputs video over HDMI and VGA by default. To switch to
composite video output, connect a HDMI or VGA display, then select PAL
or NTSC output from the menu system.
If both Ethernet & Wi-Fi are available, which connection will take
priority?
When Ethernet is not available or disconnected, system will try to use
Wi-Fi connection. If both connections are available, Ethernet will take
priority for data transfer.
How do I remove an inserted CF card?
You can install a CF card to replace the 4GB internal memory. The card slot
is located behind a metal plate (the CF card cover/remover). To remove an
inserted CF card, use the CF card cover/remover’s metal hooks to pull out
the card.