Installation guide

ManualsBrandsSIIG ManualsTVs & monitorsCE-H22111-S1

1x4 HDMI Splitter with

4Kx2K & EDID Management

Installation Guide

04-0946A

Introduction

The 1x4 HDMI Splitter with 4Kx2K & EDID

Management splits one HDMI signal to four HDMI

displays at up to 4Kx2K resolution.

Key Features and Benefits

• Broadcast HDMI video/audio signals from

one HDMI source to four displays without

losing quality

• Supports HDMI Deep Color & 3D

• Supports 1080p and up to 4Kx2K PC

resolution

• Supports Dolby Digital, DTS-HD and Dolby

True-HD audio

• Video bandwidth: 340MHz (10.2Gbps)

• Embedded default EDID and EDID learning

ability

Summary of content (8 pages)

PAGE 1
x4 HDMI Splitter with 4Kx2K & EDID Management Installation Guide Introduction The 1x4 HDMI Splitter with 4Kx2K & EDID Management splits one HDMI signal to four HDMI displays at up to 4Kx2K resolution. Key Features and Benefits • • • • • • 04-0946A Broadcast HDMI video/audio signals from one HDMI source to four displays without losing quality Supports HDMI Deep Color & 3D Supports 1080p and up to 4Kx2K PC resolution Supports Dolby Digital, DTS-HD and Dolby True-HD audio Video bandwidth: 340MHz (10.
PAGE 2
Package Contents • • • • 1x4 HDMI Splitter with 4Kx2K & EDID Management Power adapter (Output: 5V/2A) Mounting screws (2) Installation guide Layout HDMI IN HDMI HDMI OUT 1 OUT 2-4 F/W MODE DC 5V Figure 1: Rear Panel • • • 2 HDMI IN: Connects to your HDMI source device by using an HDMI cable (cable not included) HDMI OUT 1-4 (left to right): Connects to your HDMI displays by using HDMI cables (cables not included) F/W: For future firmware update
PAGE 3
• • MODE: Selects alternate EDID modes and functions. See Mode Dial in page 4 & 5. DC 5V: Power adapter jack for the included 5V power adapter POWER SIGNAL LED LED Figure 2: Front Panel • • POWER LED: On when the Splitter is powered on SIGNAL LED: On when HDMI source is detected Hardware Installation 1. 2. Power off all devices you plan to connect to the Splitter. Connect your HDMI source's HDMI output to the Splitter's HDMI IN using an HDMI cable (HDMI cable not included).
PAGE 4
3. 4. 5. 6. Connect your HDMI displays to the Splitter's HDMI OUT using HDMI cables (HDMI cables not included). Connect the included power adapter to the Splitter's DC 5V power jack and plug it into a reliable power outlet. Power on all of the connected devices. The Splitter is now ready to use. NOTE: To achieve 3D and 2Kx4K output, make sure this standard is supported by your display(s), and High Speed HDMI cables with Ethernet are used.
PAGE 5
0: 1: 2: 3: 4: 5: 6: 7: Firmware update EDID Full-HD (1080p@60) - 24bit 2D video & 7.1ch audio EDID Full-HD (1080p@60) - 24bit 2D video & 2ch audio EDID Full-HD (4K2K@30) - 24bit 2D video & 7.1ch audio EDID Full-HD (4K2K@30) - 24bit 2D video EDID HD (1080p@30)(1080i@60)(720p@ 60) - 24bit 2D video & 2ch audio Auto EDID mode: Automatically detect and analyze the EDID of all the connected HDMI displays.
PAGE 6
Application 3DTV HDMI source 3DTV 3DTV 3DTV * Input length: 5m (Max) * Output length: 10m (Max) Figure 3: Application 6
PAGE 7
Technical Support and Warranty QUESTIONS? SIIG’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analyst will promptly respond. SIIG offers a 2-year manufacturer warranty with this product.
PAGE 8
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/ Notebook systems and external peripherals. SIIG continues to grow by adding A/V and Digital Signage connectivity solutions to our extensive portfolio.