Installation guide

5
2. Point your source device's remote control to the IR
receiver's eye, the command will be sent to
Transmitter end, and the connected source device
will enforce the command accordingly.
Hardware Installation
1. Power off all devices, including the source device
and display.
2. Connect your HDMI source (such as a PC or NB) to
the Transmitter's HDMI IN connector by using an
HDMI cable.
3. Connect the local HDMI display to Transmitter's
HDMI OUT.
source
device
Figure 4
local
display
4. Connect a remote HDMI display (such as a LCD TV)
to the Receiver's HDMI OUT connector.
Figure 5
5. Connect the IR blaster cable and IR receiver cable to
the Transmitter and Receiver's IR ports respectively.
Skip this step if IR control is not needed.