User Manual

ManualsBrandsSIIG ManualsAccessories & SuppliesHDMI to 3G-SDI Splitter Converter 1x2 with Loop-Out for Local Display

1

2

3

4

5

6

7

5

EDID Learning

EDID is used to transmit the make, model and

characteristics of a monitor to the display adapter

in the computer. It’ s also used by a HDTV to

identify its maximum resolution to the DVD

player, A/V receiver or video processor.

1. Disconnect the HDMI to 3G-SDI Converter

from the the HDMI source and the display

and make sure the power adapter is not

plugged in.

2. Set the converter's EDID pin down.

3. Connect your display to the converter

’ s

HDMI connector.

4. Turn on your display if it's not already on.

5. Plug in the converter's power adapter to

power up the converter. The HDCP and 3G

LEDs will be lit, then the HD LED will flash

briefly to indicate the learning process is

complete.