Installation guide

ManualsBrandsSIIG Manualsaudio & home theatreCE-SD0711-S1

HDMI to 3G-SDI Scaler

Installation Guide

04-0920A

Introduction

The HDMI to 3G-SDI Scaler allows you to

broadcast HDMI signals from one source to two

3G-SDI outputs.

Key Features and Benefits

• Convert HDMI signals to SDI

• Provides two SDI outputs

• Operates at 270Mb/s, 1.485Gb/s and

2.97Gb/s data rates

• Auto 3G/HD/SD-SDI detection

• Auto audio re-sample to 48KHz 2 channels,

Stereo

• Supported HD formats:

• 720p 50 & 60

• 1080i 50 & 60

• 1080p24, 25, 30, 50 & 60

• Supports 525i & 625i SD D1 format

• Metal housing and wall-mountable

Summary of content (12 pages)

PAGE 1
HDMI to 3G-SDI Scaler Installation Guide Introduction The HDMI to 3G-SDI Scaler allows you to broadcast HDMI signals from one source to two 3G-SDI outputs. Key Features and Benefits • • • • • • • • 04-0920A Convert HDMI signals to SDI Provides two SDI outputs Operates at 270Mb/s, 1.485Gb/s and 2.
PAGE 2
Package Contents • • • HDMI to 3G-SDI Scaler Power adapter (Output: 12V/1A) Installation guide Layout Power LED HDMI IN Power jack indicator USB port (for future firmware upgrade) Mode buttons and mode LED indicators SDI OUT Figure 1: Top Layout Mode LED indicators SDI output port Mode buttons Figure 2: Front Layout 2
PAGE 3
Application HDMI source (DVD player, video game console, computer, etc) Display 1 HDMI cable SDI cable SDI cable Display 2 Figure 3: Application Hardware Installation 1. 2. 3. Power off all devices you plan to connect to the Scaler. Connect your HDMI source to the Scaler’ s HDMI IN connector using a HDMI cable (cable not included). Connect your displays to the Scaler’ s SDI OUT connectors using a SDI cable (cable not included).
PAGE 4
. 5. 6. Connect the Scaler's power adapter. Once powered on, the Power LED indicator on the rear panel will turn on. Power on all connected devices. The HDMI to 3G-SDI Scaler is now ready to use.
PAGE 5
• Format Mode: Press Button 1 to set the Scaler to format mode, then press Button 1, 2 and 3 to set the resolution, frame rate and fraction respectively. See Figure 5. Button Button Button The frame rate with background color is the default setting. Press Button 2 to change the frame rate.
PAGE 6
• TV Wall Mode: Press Button 2 to set the Scaler to TV wall mode, then keep pressing Button 2 to cycle through the different TV wall modes (2x2, 3x3, 4x4 or off). Press Button 3 to change to a different display section. See Figure 8.
PAGE 7
• • • Aspect Ratio Mode: Press Button 3 to change between 4:3 and 16:9 aspect ratio Firmware mode: Press and hold down button 2 and 3 simultaneously, the firmware version is displayed on the upper left corner of the monitor Default settings: Press all three buttons simultaneously, the Scaler will reset to the default settings Mode LED Indicator The Mode LED indicators light up during the resolution selection process. See Figure 6.
PAGE 8
Once the setup is complete, the Mode LED indicators will display similar to Figure 7.
PAGE 9
Blank Page 9
PAGE 10
Blank Page 10
PAGE 11
Technical Support and Warranty QUESTIONS? SIIG’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analyst will promptly respond. SIIG offers a 3-year manufacturer warranty with this product.
PAGE 12
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/ O adapters) that bridge the connection between Desktop/Notebook systems and external peripherals. SIIG continues to grow by adding A/V and Digital Signage connectivity solutions to our extensive portfolio.