Installation guide

ManualsBrandsSIIG Manualsaudio & home theatreCE-SD0711-S1

1

2

3

4

5

6

7

8

9

7

• Aspect Ratio Mode: Press Button 3 to

change between 4:3 and 16:9 aspect ratio

• Firmware mode: Press and hold down

button 2 and 3 simultaneously, the firmware

version is displayed on the upper left corner

of the monitor

• Default settings: Press all three buttons

simultaneously, the Scaler will reset to the

default settings

Mode LED Indicator

The Mode LED indicators light up during the

resolution selection process. See Figure 6.

Figure 6