LCD TV/Monitor Tilting Mount - 10" to 26" Installation Instructions Hardware A B (x2) M6X60 (x2) M6 concrete bolt anchor C D E F G (x4) M6 small washer (x2) M6 large washer (x4) M4X12 screw (x4) M5X12 screw (x4) M6X12 screw 4mm Allen Key 6mm Allen Key Tools Required: Electronic stud finder, #2 Phillips head screw driver, drill, 1/8" drill bit (wood stud installation), 3/8" masonry drill bit (concrete/brick wall installation).
Step 1: Wall Plate Installation Wood Stud Installation Use a high-quality electronic stud finder (commercially available) to locate dead center 1 of the wood stud and mark the location with a pencil. 2 Hold the wall plate (Figure 1) to the wall, use the two mounting holes to mark the locations to be used for mounting the wall plate. 3 Take down the wall plate and drill two 2" deep holes, using a 1/8" drill bit at the positions you've marked.
Step 2: Display Plate Installation 1 Place your TV screen down on a soft, flat surface, and locate the threaded mounting points that are located on the back of the display. 2 According to the size of the display's hole, choose the corresponding screw (E/F/G) and washer (C) and insert into the hole as shown (Figure 3) and tighten. Figure 3 Step 3: Final Installation 1 Hang the display plate onto the top of the wall plate and slip it into the wall plate as shown (Figure 4).
Maintenance Check the mounting screws every two months for tightness. Important: If you don't understand the installation instructions, please consult an installation specialist.
Blank Page Page 5
Blank Page Page 6
Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analysts will promptly respond. SIIG offers a 5-year manufacturer warranty with this product.
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer of I/O connectivity products, including PCI & ISA serial and parallel ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b), networking, sound cards, and other accessories. SIIG is the premier onestop source of upgrades. SIIG products offer comprehensive user manuals, many user-friendly features, and are backed by an extensive manufacturer warranty.
