Installation guide

13
2. Double click Ports (COM & LPT),
CyberSerial... 16Cxxx... should be
displayed.
3. Double click Multi-function adapters, SIIG
CyberPro 2S PCI board should be
displayed.
Changing COM Port Address
Some serial devices need a specific COM port in
order to work. If your serial device works properly,
do not change this setting.
Windows 8 / 7 / Vista / XP / Server 2003 &
2008 / 2008 R2 / 2000
1. From the Device Manager window double
click Ports (COM & LPT), then double click
CyberSerial... port you want to change.
2. Click Settings tab and click Advanced.
3. Click the down arrow next to the COM Port
number box, select a COM port that is not
in use. Click OK.
4. Click OK again, then close Device Manager
to save the changes.