Installation guide

7
3. Select No, not this time, click Next. (Skip
this step if not prompted)
4. Select Install the software automatically
(Recommended), then click Next. (Skip
this step if not prompted)
5. Click Finish. It may take several minutes
for this step to appear. Do not interrupt the
process during this time.
6. Repeat steps 3-5 two times to complete the
installation.
Windows Server 2008 (32-/64-bit)
1. Install the board and boot up Windows.
2. At the Found New Hardware Wizard, click
Locate and install driver software
(recommended).
3. Click Continue. (Skip this step if not
prompted)
4. Insert the driver CD.
5. Click Don't search online. (Skip this step if
not prompted)
6. Click I don't have the disc. Show me other
options. (Skip this step if not prompted)