Installation guide

8
7. Click Browse my computer for driver
software (advanced). (Skip this step if not
prompted)
8. Type D:, then click Next. (Change D: to
match your CD/DVD-ROM drive letter)
9. At The sofware for this device has been
successfully installed, click Close.
10. Repeat steps 5-9 to complete the installation.
Windows Server 2008 R2
1. Install the board and boot up Windows.
2. Right click Computer, click Manage, click
Device Manager.
3. Insert the driver CD. Right click PCI Device,
click Update Driver Software.
4. Click Browse my computer for driver
software.
5. Type D:, then click Next. (Change D: to
match your CD/DVD-ROM drive letter)
6. At Windows has successfully updated
your driver software, click Close.
7. Right click PCI Serial Port, click Update
Driver Software.